The QuoteSchedule report no longer looks for a
GroupingField when it is not specified.
Build 7.5.50.00 November 15, 2024
Customer Build.
Build 7.5.49.00 November 7, 2024
Customer Build.
Build 7.5.48.00 November 1, 2024
Customer Build.
Build 7.5.47.00 October 22, 2024
Initial release of a Pdf Submittal package concatenating
MH Pro's structure submittals with Pdfs of all incidental boots,
steps, joint seals, castings, etc. used on the job.
Build 7.5.46.00 October 11, 2024
Customer Build.
Build 7.5.45.00 October 9, 2024
Customer Build.
Build 7.5.44.00 October 7, 2024
Customer Build.
Build 7.5.43.00 October 3, 2024
Customer Build.
Build 7.5.42.00 September 23, 2024
Customer Build.
Build 7.5.41.00 September 17, 2024
Customer Build.
Build 7.5.40.00 September 11, 2024
Customer Build.
Build 7.5.39.00 September 4, 2024
Customer Build.
Build 7.5.38.00 August 30, 2024
Customer Build.
Build 7.5.37.00 August 26, 2024
Customer Build.
Build 7.5.36.00 August 21, 2024
Customer Build.
Build 7.5.35.00 August 7, 2024
Customer Build.
Build 7.5.34.00 July 18, 2024
Customer Build.
Build 7.5.33.00 July 17, 2024
Customer Build.
Build 7.5.32.00 July 10, 2024
Customer Build.
Build 7.5.31.00 July 6, 2024
Customer Build.
Build 7.5.30.00 July 1, 2024
Customer Build.
Build 7.5.29.00 June 19, 2024
Customer Build.
Build 7.5.28.00 June 18, 2024
Customer Build.
Build 7.5.27.00 June 16, 2024
Customer Build.
Build 7.5.26.00 June 13, 2024
Customer Build.
Build 7.5.25.00 June 11, 2024
Customer Build.
Build 7.5.24.00 June 9, 2024
Protractor stability and error proofing.
Build 7.5.23.00 June 6, 2024
Customer Build.
Build 7.5.22.00 June 5, 2024
Customer Build.
Build 7.5.21.00 May 17, 2024
Customer Build.
Build 7.5.20.00 May 7, 2024
Customer Build.
Build 7.5.19.00 May 3, 2024
Customer Build.
Build 7.5.18.00 April 23, 2024
Graphic views can now be defined as Title Block elements.
Now the Submittal drawing can be a shop drawing with a rollout
view.
Build 7.5.17.00 April 19, 2024
Customer Build.
Build 7.5.16.00 April 9, 2024
Customer Build.
Build 7.5.15.00 April 9, 2024
Customer Build.
Build 7.5.14.00 April 5, 2024
Customer Build.
Build 7.5.13.00 March 31, 2024
Customer Build.
Build 7.5.12.00 March 27, 2024
Customer Build.
Build 7.5.11.00 March 20, 2023
Bug Fixes:
Old structures with Custom pieces above the base now
find the Bottom Size when no size data is present for
higher Custom zones on autostacking.
Fixed a hard error in displaying steps in the plan
view when the size data is interpreted as zero size.
Build 7.5.10.00 March 18, 2024
Custom size pieces can now be set to use any of 5
Custom Size Zones: Bottom Size (default for most), Mid 1 Size,
Mid 2 Size, Mid 3 Size, and Opening Size (default for
AdjustingRings). This allows Custom size pieces in chimneys
and other complex builds.
Build 7.5.09.00 March 14, 2024
Customer Build.
Build 7.5.08.00 March 11, 2024
Customer Build.
Build 7.5.07.00 March 8, 2024
Customer Build.
Build 7.5.06.00 March 4, 2024
Customer Build.
Build 7.5.05.00 February 26, 2024
Customer Build.
Build 7.5.04.00 February 21, 2024
Customer Build.
Build 7.5.03.00 January 31, 2024
Customer Build.
Build 7.5.02.00 January 30, 2024
Customer Build.
Build 7.5.01.00 January 19, 2024
Customer Build.
Build 7.5.00.00 January 14, 2024
Customer Build.
Build 7.4.99.00 January 5, 2024
Customer Build.
Build 7.4.98.00 January 1, 2024
Customer Build.
Build 7.4.97.00 December 20, 2023
Customer Build.
Build 7.4.96.00 December 15, 2023
Customer Build.
Build 7.4.95.00 December 8, 2023
Customer Build.
Build 7.4.94.00 November 20, 2023
Customer Build.
Build 7.4.93.00 October 31, 2023
Customer Build.
Build 7.4.92.00 October 6, 2023
Customer Build.
Build 7.4.91.00 October 4, 2023
Customer Build.
Build 7.4.90.00 September 28, 2023
Customer Build.
Build 7.4.89.00 September 20, 2023
Customer Build.
Build 7.4.88.00 September 12, 2023
Customer Build.
Build 7.4.87.00 September 4, 2023
Customer Build.
Build 7.4.86.00 August 30, 2023
Customer Build.
Build 7.4.85.00 August 18, 2023
Shallow channels, with the bench below the outlet midline,
now draw properly.
Added a new Default Drop Type to the Options pull down menu.
Each user can select the type of drop that initially generates
when creating a new drop opening.
Build 7.4.84.00 August 14, 2023
Customer Build.
Build 7.4.83.00 August 3, 2023
Customer Build.
Build 7.4.82.00 July 31, 2023
Customer Build.
Build 7.4.81.00 July 27, 2023
Customer Build.
Build 7.4.80.00 July 26, 2023
Customer Build.
Build 7.4.79.00 July 14, 2023
Customer Build.
Build 7.4.78.00 July 6, 2023
Customer Build.
Build 7.4.77.00 July 2, 2023
Customer Build.
Build 7.4.76.00 June 26, 2023
Customer Build.
Build 7.4.75.00 June 22, 2023
Bug Fixes:
Fixed a bug when multiple users migrated jobs
at the same time in an SQL Server database.
Build 7.4.74.00 June 14, 2023
Bug Fixes:
Fixed a bug handling discounts.
Build 7.4.73.00 June 7, 2023
Customer Build.
Build 7.4.72.00 June 5, 2023
Bug Fixes:
Fixed a bug that deleted the wrong miscellaneous
items.
Fixed a bug that zeroed priced items.
Build 7.4.71.00 June 5, 2023
Bug Fixes:
Fixed a bug copying reference structure data.
Build 7.4.70.00 June 1, 2023
Bug Fixes:
Fixed a bug from 2018 that broke Job Prices for
individual precast pieces.
Build 7.4.69.00 May 27, 2023
Customer Build.
Build 7.4.68.00 May 26, 2023
Customer Build.
Build 7.4.67.00 May 19, 2023
Customer Build.
Build 7.4.66.00 May 18, 2023
Customer Build.
Build 7.4.65.00 May 10, 2023
Customer Build.
Build 7.4.64.00 May 8, 2023
Customer Build.
Build 7.4.63.00 May 3, 2023
Customer Build.
Build 7.4.62.00 May 1, 2023
Customer Build.
Build 7.4.61.00 April 27, 2023
Customer Build.
Build 7.4.60.00 April 26, 2023
Customer Build.
Build 7.4.59.00 April 24, 2023
Customer Build.
Build 7.4.58.00 April 19, 2023
Customer Build.
Build 7.4.57.00 April 18, 2023
Customer Build.
Build 7.4.56.00 April 17, 2023
Customer Build.
Build 7.4.55.00 April 14, 2023
Customer Build.
Build 7.4.54.00 April 4, 2023
Customer Build.
Build 7.4.53.00 March 31, 2023
Customer Build.
Build 7.4.52.00 March 30, 2023
Customer Build.
Build 7.4.51.00 March 26, 2023
Customer Build.
Build 7.4.50.00 March 24, 2023
Customer Build.
Build 7.4.49.00 March 23, 2023
Customer Build.
Build 7.4.48.00 March 14, 2023
Customer Build.
Build 7.4.47.00 March 13, 2023
Bug Fixes:
Fixed a bug sizing notes that caused all notes to have
0 height.
Build 7.4.46.00 March 13, 2023
Customer Build.
Build 7.4.45.00 March 9, 2023
Customer Build.
Build 7.4.44.00 March 8, 2023
Customer Build.
Build 7.4.43.00 February 24, 2023
Customer Build.
Build 7.4.42.00 February 9, 2023
Customer Build.
Build 7.4.41.00 February 7, 2023
Customer Build.
Build 7.4.40.00 February 1, 2023
Customer Build.
Build 7.4.39.00 January 24, 2023
Customer Build.
Build 7.4.38.00 December 28, 2022
Customer Build.
Build 7.4.37.00 December 26, 2022
Bug Fixes:
Alright too many of youse guys (or is that y'all?) have
just ignored the "Structure is more than 50' deep" warning
messages. So now MH Pro just refuses to autostack a structure
with more than 50 precast pieces. This should avoid
out-of-memory errors that require manual changes to the
database to fix.
Build 7.4.36.00 December 20, 2022
Bug Fixes:
Fixed a bug checking for a Moore base when drawing a shop
drawing of a custom riser above the base. Argh.
Build 7.4.35.00 December 13, 2022
New Moore base graphics match the Moore base geometry.
Build 7.4.34.00 December 6, 2022
Customer Build.
Build 7.4.33.00 December 5, 2022
Customer Build.
Build 7.4.32.00 November 29, 2022
Customer Build.
Build 7.4.31.00 November 23, 2022
Customer Build.
Build 7.4.30.00 November 22, 2022
Customer Build.
Build 7.4.29.00 November 21, 2022
Customer Build.
Build 7.4.28.00 November 15, 2022
Customer Build.
Build 7.4.27.00 November 3, 2022
Customer Build.
Build 7.4.26.00 November 1, 2022
MH Pro now supports reports that generate per structure pdf
files, then creates a CSV report that includes the path to the
pdf files. This makes it possible for the pdf files to be uploaded
into CRM, ERP, or other systems by running one report.
Build 7.4.25.00 October 20, 2022
Reports now run as a separate 64 bit process which avoids
"out of memory" errors.
Build 7.4.24.00 October 13, 2022
Customer Build.
Build 7.4.23.00 September 30, 2022
Customer Build.
Build 7.4.22.00 September 26, 2022
Customer Build.
Build 7.4.21.00 September 23, 2022
Customer Build.
Build 7.4.20.00 September 20, 2022
Customer Build.
Build 7.4.19.00 September 16, 2022
Customer Build.
Build 7.4.18.00 September 15, 2022
Customer Build.
Build 7.4.17.00 September 15, 2022
Bug Fixes:
Fixed a problem with server databases where a saved .mhpro
file couldn't be imported into MH Pro! without manually
fixing the file.
Build 7.4.16.00 September 13, 2022
Customer Build.
Build 7.4.15.00 September 9, 2022
Customer Build.
Build 7.4.14.00 September 7, 2022
Customer Build.
Build 7.4.13.00 August 30, 2022
Customer Build.
Build 7.4.12.00 August 24, 2022
Bug Fixes:
Fixed a problem in saving a pdf file to a root directory
when using the new reporting system.
Build 7.4.11.00 August 11, 2022
Customer Build.
Build 7.4.10.00 July 19, 2022
Customer Build.
Build 7.4.09.00 July 19, 2022
Customer Build.
Build 7.4.08.00 July 12, 2022
Customer Build.
Build 7.4.07.00 July 11, 2022
Customer Build.
Build 7.4.06.00 July 5, 2022
MH Pro can now kick off a program when generating reports.
So now you can upload CSV files directly after generating
them.
Added Adjust Floor By to the Structure Design screen so
the fit of the pipes in the base can be arbitrarily
adjusted.
Bug Fixes:
Booted openings in unstacked structures no longer
pull the structure size from the upstream structure.
Argh.
Build 7.4.05.00 June 30, 2022
Bug Fixes:
Fixed an 'Ambiguous column name 'StructureID' error
when running a report using a SQL Server database.
Build 7.4.04.00 June 28, 2022
Customer Build.
Build 7.4.03.00 June 21, 2022
Customer Build.
Build 7.4.02.00 June 13, 2022
The default location for new databases is now
AppData\Roaming\MHPro\Database. This should lessen issues with
OneDrive corrupting databases in Documents\MHPro.
Build 7.4.01.00 June 8, 2022
Removed filename restrictions on reading .mhpro save
files.
Build 7.4.00.00 May 31, 2022
Customer Build.
Build 7.3.99.00 May 24, 2022
Customer Build.
Build 7.3.98.00 May 16, 2022
Customer Build.
Build 7.3.97.00 May 15, 2022
Customer Build.
Build 7.3.96.00 May 6, 2022
Customer Build.
Build 7.3.95.00 May 4, 2022
Customer Build.
Build 7.3.94.00 May 3, 2022
Customer Build.
Build 7.3.93.00 May 3, 2022
Bug Fixes:
Fixed an underflow error when working above 1,300m.
Build 7.3.92.00 April 29, 2022
Testing a Perfect Base interface.
Build 7.3.91.00 April 28, 2022
Customer Build.
Build 7.3.90.00 April 18, 2022
Customer Build.
Build 7.3.89.00 April 14, 2022
Customer Build.
Build 7.3.88.00 April 13, 2022
Customer Build.
Build 7.3.87.00 April 12, 2022
Customer Build.
Build 7.3.86.00 March 30, 2022
Customer Build.
Build 7.3.85.00 March 26, 2022
Added new plan view angle dimension options so that angles
can reference to 0 instead of chaining to the next opening.
Bug Fixes:
Deconflicted Lifter dimensions and Top Size Dims.
Build 7.3.84.00 March 25, 2022
Customer Build.
Build 7.3.83.00 March 13, 2022
Customer Build.
Build 7.3.82.00 March 10, 2022
Customer Build.
Build 7.3.81.00 March 7, 2022
Customer Build.
Build 7.3.80.00 March 7, 2022
Customer Build.
Build 7.3.79.00 February 25, 2022
Customer Build.
Build 7.3.78.00 February 21, 2022
Customer Build.
Build 7.3.77.00 February 16, 2022
Customer Build.
Build 7.3.76.00 February 11, 2022
Added support for Perfect Base builds.
Build 7.3.75.00 February 2, 2022
Customer Build.
Build 7.3.74.00 January 31, 2022
Customer Build.
Build 7.3.73.00 January 27, 2022
Added new Frame/Ring and Grate/Cover Source controls to the
Details tab on the Job Data screen.
Build 7.3.72.00 January 25, 2022
Early move for new Frame/Grate Source logic.
Build 7.3.71.00 January 25, 2022
Customer Build.
Build 7.3.70.00 January 17, 2022
Customer Build.
Build 7.3.69.00 January 14, 2022
The Protractor On Screen can now be closed by double
double clicking on the center, big green ball.
Build 7.3.68.00 January 11, 2022
Customer Build.
Build 7.3.67.00 January 3, 2022
Customer Build.
Build 7.3.66.00 December 29, 2021
Test Build.
Build 7.3.65.00 December 20, 2021
Customer Build.
Build 7.3.64.00 December 15, 2021
Test build.
Build 7.3.63.00 December 14, 2021
Test build.
Build 7.3.62.00 December 9, 2021
Customer build.
Build 7.3.61.00 November 18, 2021
Customer build.
Build 7.3.60.00 November 17, 2021
Customer build.
Build 7.3.59.00 November 15, 2021
Customer build.
Build 7.3.58.00 November 15, 2021
Customer build.
Build 7.3.57.00 November 12, 2021
Lifters can now be placed at specified offsets. In the
Stack Editor screen > Lifter tab > Lifter Angles, specify
Angle1xOffset1,Angle2xOffset2, etc.
Build 7.3.56.00 November 5, 2021
Customer build.
Build 7.3.55.00 November 4, 2021
Customer build.
Build 7.3.54.00 October 27, 2021
Customer build.
Build 7.3.53.00 October 26, 2021
Customer build.
Build 7.3.52.00 October 13, 2021
Customer build.
Build 7.3.51.00 October 6, 2021
Customer build.
Build 7.3.50.00 October 1, 2021
Customer build.
Build 7.3.49.00 September 24, 2021
Customer build.
Build 7.3.48.00 September 23, 2021
Customer build.
Build 7.3.47.00 September 20, 2021
Customer build.
Build 7.3.46.00 September 20, 2021
Customer build.
Build 7.3.45.00 September 16, 2021
Customer build.
Build 7.3.44.00 September 15, 2021
Customer build.
Build 7.3.43.00 September 8, 2021
Customer build.
Build 7.3.42.00 September 2, 2021
Customer build.
Build 7.3.41.00 August 30, 2021
Customer build.
Build 7.3.40.00 August 25, 2021
Customer build.
Build 7.3.39.00 August 19, 2021
Customer build.
Build 7.3.38.00 August 12, 2021
Bug Fixes:
Fixed memory corruption bug when running multiple
reports.
Build 7.3.37.00 August 10, 2021
Bug Fixes:
Fixed a bug in drawing drop structures in 7.3.36.
Build 7.3.36.00 August 3, 2021
Customer build.
Build 7.3.35.00 July 24, 2021
Customer build.
Build 7.3.34.00 July 22, 2021
Customer build.
Build 7.3.33.00 July 13, 2021
Customer build.
Build 7.3.32.00 July 8, 2021
Customer build.
Build 7.3.31.00 July 6, 2021
Customer build.
Build 7.3.30.00 June 29, 2021
Customer build.
Build 7.3.29.00 June 15, 2021
Bug Fixes:
Fixed a bug copying reference structure data in
7.3.28.
Build 7.3.28.00 June 11, 2021
Customer build.
Build 7.3.27.00 June 10, 2021
Customer build.
Build 7.3.26.00 June 10, 2021
Customer build.
Build 7.3.25.00 June 7, 2021
Customer build.
Build 7.3.24.00 June 4, 2021
Customer build.
Build 7.3.23.00 June 1, 2021
Customer build.
Build 7.3.22.00 May 27, 2021
Customer build.
Build 7.3.21.00 May 24, 2021
Customer build.
Build 7.3.20.00 May 12, 2021
Customer build.
Build 7.3.19.00 May 10, 2021
Customer build.
Build 7.3.18.00 May 5, 2021
Bug Fixes:
Stripping database drivers from the MH Pro installer.
If you need drivers for SQLServer or PostgreSQL you
will need to install them separately.
Build 7.3.17.00 April 30, 2021
Bug Fixes:
Fix a bug drawing foam coatings.
Build 7.3.16.00 April 28, 2021
Customer build.
Build 7.3.15.00 April 27, 2021
Customer build.
Build 7.3.14.00 April 26, 2021
Bug Fixes:
Database connection resets always generate a popup so
they can be tracked and traced.
Build 7.3.13.00 April 22, 2021
Bug Fixes:
Fixed some of the bugs in database error handling.
Error handlers should not have bugs.
Build 7.3.12.00 April 14, 2021
Customer build.
Build 7.3.11.00 April 14, 2021
Customer build.
Build 7.3.10.00 April 12, 2021
Customer build.
Build 7.3.09.00 April 9, 2021
Customer build.
Build 7.3.08.00 March 31, 2021
Customer build.
Build 7.3.07.00 March 27, 2021
Customer build.
Build 7.3.06.00 March 24, 2021
Bug Fixes:
Fixed weir wall hole 3 crashes.
Build 7.3.05.00 March 16, 2021
Customer build.
Build 7.3.04.00 March 15, 2021
Customer build.
Build 7.3.03.00 March 5, 2021
Bug Fixes:
SQL Server disconnects should automatically reconnect
where you left off.
Build 7.3.02.00 March 4, 2021
BOM reports now have better controls over which notes
are printed for jobs and structures.
Build 7.3.01.00 February 24, 2021
Customer build.
Build 7.3.00.00 February 15, 2021
Customer build.
Build 7.2.99.00 February 8, 2021
Customer build.
Build 7.2.98.00 January 26, 2021
Customer build.
Build 7.2.97.00 January 6, 2020
Customer build.
Build 7.2.96.00 January 5, 2020
Customer build.
Build 7.2.95.00 January 4, 2020
Customer build.
Build 7.2.94.00 December 16, 2020
Customer build.
Build 7.2.93.00 December 4, 2020
Customer build.
Build 7.2.92.00 November 26, 2020
Customer build.
Build 7.2.91.00 November 24, 2020
Customer build.
Build 7.2.90.00 November 23, 2020
Customer build.
Build 7.2.89.00 November 13, 2020
Customer build.
Build 7.2.88.00 November 11, 2020
Customer build.
Build 7.2.87.00 November 4, 2020
Customer build.
Build 7.2.86.00 November 3, 2020
Customer build.
Build 7.2.85.00 October 27, 2020
Customer build.
Build 7.2.84 October 21, 2020
Customer build.
Build 7.2.83 October 19, 2020
Customer build.
Build 7.2.82 October 7, 2020
Customer build.
Build 7.2.81 October 7, 2020
Bug Fixes:
Fixed a "Type mismatch" error on shop reports that
highlight the piece in the stack.
Build 7.2.80 October 3, 2020
Customer build.
Build 7.2.79 October 2, 2020
Customer build.
Build 7.2.78 September 28, 2020
Customer build.
Build 7.2.77 September 24, 2020
Customer build.
Build 7.2.76 September 10, 2020
Customer build.
Build 7.2.75 September 9, 2020
Customer build.
Build 7.2.74 August 31, 2020
Customer build.
Build 7.2.73 August 13, 2020
Bug Fixes:
Fixed an "item cannot be found" error when
stacking a structure that was related to a
missing miscellaneous image field.
Build 7.2.72 August 6, 2020
Customer build.
Build 7.2.71 July 29, 2020
Customer build.
Build 7.2.70 July 27, 2020
Customer build.
Build 7.2.69 July 23, 2020
Customer build.
Build 7.2.68 July 10, 2020
Customer build.
Build 7.2.67 July 7, 2020
Customer build.
Build 7.2.66 June 26, 2020
Customer build.
Build 7.2.65 June 25, 2020
Customer build.
Build 7.2.64 June 10, 2020
Customer build.
Build 7.2.63 June 9, 2020
Bug Fixes:
Fixed an error when running reports on a high
resolution screen that screwed up image heights.
Build 7.2.62 June 5, 2020
Customer build.
Build 7.2.61 June 4, 2020
Customer build.
Build 7.2.60 June 3, 2020
Customer build.
Build 7.2.59 June 1, 2020
Customer build.
Build 7.2.58 May 29, 2020
Customer build.
Build 7.2.57 May 26, 2020
Customer build.
Build 7.2.56 May 20, 2020
Test build.
Build 7.2.55 May 15, 2020
Customer build.
Build 7.2.54 May 14, 2020
Customer build.
Build 7.2.53 May 4, 2020
Customer build.
Build 7.2.52 April 28, 2020
Demo builds.
Build 7.2.51 April 17, 2020
Customer build.
Build 7.2.50 April 16, 2020
Customer build.
Build 7.2.49 March 26, 2020
Customer build.
Build 7.2.48 March 23, 2020
Customer build.
Build 7.2.47 February 28, 2020
Customer build.
Build 7.2.46 February 13, 2020
Customer build.
Build 7.2.45 February 10, 2020
Customer build.
Build 7.2.44 February 7, 2020
Customer build.
Build 7.2.43 February 3, 2020
Customer build.
Build 7.2.42 January 13, 2020
Customer build.
Build 7.2.41 January 9, 2020
Bug Fixes:
Fixed an error in SQLServer when copying a structure
with a data type that wasn't accounted for in the copy
logic.
Build 7.2.40 December 17, 2019
Customer build.
Build 7.2.39 December 5, 2019
Customer build.
Build 7.2.38 November 26, 2019
Customer build.
Build 7.2.37 November 21, 2019
Customer build.
Build 7.2.36 November 15, 2019
Customer build.
Build 7.2.35 November 12, 2019
Customer build.
Build 7.2.34 October 18, 2019
Customer build.
Build 7.2.33 October 9, 2019
Customer build.
Build 7.2.32 October 4, 2019
Bug Fixes:
Fixed USF hatch graphics so that the hinges for a square
hatch in the plan view match the sides that open in the
elevation view.
Build 7.2.31 September 27, 2019
Bug Fixes:
Fixed openings so that they once again draw for a single
piece in the Plan View when the piece has a poured in base
configuration.
Build 7.2.30 September 23, 2019
Customer build.
Build 7.2.29 September 19, 2019
Customer build.
Build 7.2.28 September 18, 2019
Bug Fixes:
Fixed the size calculation for ANY size openings.
Build 7.2.27 September 16, 2019
Customer build.
Build 7.2.26 September 16, 2019
Customer build.
Build 7.2.25 September 10, 2019
Customer build.
Build 7.2.24 September 5, 2019
Customer build.
Build 7.2.23 September 3, 2019
Customer build.
Build 7.2.22 August 30, 2019
Customer build.
Build 7.2.21 August 30, 2019
Bug Fixes:
Fixed the migration of lifters for a server database
so that the logic refers to the appropriate table name.
Build 7.2.20 August 28, 2019
Customer build.
Build 7.2.19 August 27, 2019
Through holes are now supported for lifters.
Bug Fixes:
*Same as Outlet* is now *Same-as-Outlet* so that it
does not try to match all openings with "cast" in their
name.
Mesh now reaches into extension flanges.
Build 7.2.18 August 22, 2019
Bug Fixes:
Fixed the migration of slab pour bases.
Build 7.2.17 August 20, 2019
Bug Fixes:
Fixed the Drag and Drop functionality that was
inadvertently broken by the fix for Windows Update in
release 7.2.14.
Build 7.2.16 August 19, 2019
Customer build.
Build 7.2.15 August 19, 2019
Bug Fixes:
Postgres wants booleans to be booleans. SQLServer insists
that booleans are numeric. Why can't we all just get
along?
Build 7.2.14 August 15, 2019
Rebar now extends into extension flanges.
Required rebar inputs are now highlighted when empty.
Bug Fixes:
Mitigated an issue with Windows Update patches for
CVE-2019-1182 that broke MH Pro.
MH Pro now tries to re-connect to the database on
network hiccups.
Fixed an error in drawing channels that would not
trim the channel properly when the channel arc was the
full length of the channel.
Fixed a race condition in the protractor that had the
protractor both starting up and shutting down at the
same time.
Build 7.2.13 August 11, 2019
Customer build.
Build 7.2.12 August 1, 2019
Customer build.
Build 7.2.11 July 11, 2019
Customer build.
Build 7.2.10 June 27, 2019
Customer build.
Build 7.2.09 June 25, 2019
Customer build.
Build 7.2.08 June 21, 2019
Customer build.
Build 7.2.07 June 19, 2019
Bug Fixes:
Fixed a bug where *Same As Outlet* was not the same
after Apply.
Build 7.2.06 June 17, 2019
Customer build.
Build 7.2.05 June 12, 2019
Bug Fixes:
Fixed a "Could not update; currently locked." error
on database upgrade. This time for sure.
Build 7.2.04 June 10, 2019
Customer build.
Build 7.2.03 June 6, 2019
Customer build.
Build 7.2.02 May 26, 2019
Report filenames can now use JobNumber instead of JobName.
Use Options > Report File Names to select
JobNumber-StructureName-ReportName filenames.
Build 7.2.01 May 20, 2019
Customer build.
Build 7.2.00 May 14, 2019
Customer build.
Build 7.1.99 May 14, 2019
Customer build.
Build 7.1.98 May 9, 2019
Customer build.
Build 7.1.97 May 8, 2019
Customer build.
Build 7.1.96 May 7, 2019
Customer build.
Build 7.1.95 April 30, 2019
Customer build.
Build 7.1.94 April 26, 2019
Bug Fixes:
Fixed an InstallShield issue that retained old copies
of the NewMHPro database instead of using the new one.
Of course, this completely screwed up the installation.
Curse you InstallShield.
Build 7.1.93 April 24, 2019
Bug Fixes:
Fixed the POS so that when the mouse cursor is in the
green center circle and the left mouse button is pressed,
the protractor once again follows the movement of the
mouse.
Build 7.1.92 April 22, 2019
Added a PDF-Struct button to the report toolbar to export
pdfs as one file per structure.
Bug Fixes:
Now views and procedures are created in the dbo schema
for SQLServer. This should fix a problem in installing
SQLServer databases for implementations that specify
a user specific default schema for views and procedures.
Build 7.1.91 April 11, 2019
Customer build.
Build 7.1.90 April 9, 2019
Customer build.
Build 7.1.89 April 1, 2019
Customer build.
Build 7.1.88 March 22, 2019
Customer build.
Build 7.1.87 March 18, 2019
Customer build.
Build 7.1.86 March 12, 2019
Customer build.
Build 7.1.85 March 7, 2019
Customer build.
Build 7.1.84 February 26, 2019
Bug Fixes:
Fixed the logic for drawing a step in the plan view
for a box structure that was broken in 7.1.83 as a result
of trimming exterior steps to the outside wall of the
piece.
Build 7.1.83 February 22, 2019
Customer build.
Build 7.1.82 February 13, 2019
Customer build.
Build 7.1.81 February 4, 2019
Customer build.
Build 7.1.80 February 1, 2019
Now when a structure cannot be stacked on the Structure
screen, a message offers to delete the current stack so that
an inappropriate stack is not left in place.
Build 7.1.79 January 10, 2019
ConcreteOverHole is now a first class parameter that is
used with MinimumConcreteAroundHole to prioritize bases that
meet the Concrete Over Hole limitation that Illinois is
adding.
Build 7.1.78 December 21, 2018
Bug Fixes:
Fixed weir wall holes so that they display appropriately
in the Elevation View when the wall face isn't perpendicular
to the direction of the Elevation View's view port.
Build 7.1.77 December 17, 2018
Customer build.
Build 7.1.76 December 14, 2018
Customer build.
Build 7.1.75 December 11, 2018
Customer build.
Build 7.1.74 November 28, 2018
Customer build.
Build 7.1.73 November 19, 2018
Customer build.
Build 7.1.72 November 16, 2018
Customer build.
Build 7.1.71 November 16, 2018
Now a weir wall can have up to 2 holes, see new weir
wall controls on the Pipe Options dialog window.
Build 7.1.70 November 12, 2018
Customer build.
Build 7.1.69 November 5, 2018
Added "Miscellaneous" as a new structure option so that
structures can be easily created with only miscellaneous items
for the BOM or quote.
Build 7.1.68 November 1, 2018
Customer build.
Build 7.1.67 September 20, 2018
Customer build.
Build 7.1.66 September 18, 2018
Customer build.
Build 7.1.65 September 5, 2018
Customer build.
Build 7.1.64 August 29, 2018
Customer build.
Build 7.1.63 August 24, 2018
Customer build.
Build 7.1.62 August 8, 2018
Customer build.
Build 7.1.61 July 30, 2018
Bug Fixes:
Fixed a race condition that prematurely ended the
database upgrade process, leaving the upgrade
unfinished.
Build 7.1.60 July 24, 2018
Customer build.
Build 7.1.59 July 23, 2018
Customer build.
Build 7.1.58 July 10, 2018
Bug Fixes:
Windows 10 has changed the Shell.Applications
iterators so now we use a variant instead of an
integer. Fixes an annoying error when opening a
windows file explorer to show the saved file
location.
Reports that swap English and metric units now
perform the unit conversions only once.
Build 7.1.57 July 5, 2018
Customer build.
Build 7.1.56 June 29, 2018
Customer build.
Build 7.1.55 June 28, 2018
Bug Fixes:
Fixed a division by zero error in a mis-configured
database.
Build 7.1.54 June 25, 2018
Bug Fixes:
Fixed SQL Server so that the next shipping invoice number
doesn't jump by a 1000 after a re-start.
Build 7.1.53 June 21, 2018
Custom prices can now be set on a per piece basis.
Added a new Crane Capacity field to the Job Data screen along
with a new status message that displays an error when the piece
weight exceeds the crane capacity.
Autostacking now differentiates between hole in joint and pipe
in slab collisions.
Autostacking now detects hole in joint conditions when the
structure digs deeper into the ground to increase sump depth.
Beaver slide channels (channeled hole well above outlet top of
pipe) now generate a warning about the increased channel weight
required.
Bug Fixes:
Now date entries are validated to make sure the year
is a valid 4 digit year. This fixes a problem where a three
digit year caused SQL Server to generate an error.
Build 7.1.52 June 7, 2018
Bug Fixes:
Handle upgrade and migration of really big
databases.
Build 7.1.51 June 4, 2018
The automatic stacking algorithm now treats pipe in
slab as a bigger collision than pipe in joint.
Bug Fixes:
Fixed a bug in 7.1.49 that used the wrong Frame
Library data field names on the Job Edit screen.
Build 7.1.50 May 31, 2018
Customer build.
Build 7.1.49 May 24, 2018
Customer build.
Build 7.1.48 May 11, 2018
The core automatic stacking algorithm has been revised so
that structures can have a large Build Tolerance High (they
can dig themselves deeper into the ground) and have a large
range of grade rings without digging deeper just to make
space for another grade ring.
Bug Fixes:
MH Pro now tries to automatically re-connect to the
database if it notices network disruption.
Build 7.1.47 May 7, 2018
Customer build.
Build 7.1.46 May 3, 2018
Customer build.
Build 7.1.45 April 27, 2018
Customer build.
Build 7.1.44 April 25, 2018
Customer build.
Build 7.1.43 April 24, 2018
Bug Fixes:
Fixed a nasty error in the error handler that would
display a blank screen instead of detailing the
error. Even worse, the underlying error would re-create
when ignored, but the error handler itself would be
unresponsive when re-displayed.
Fixed an error on the Pipe Options screen that caused
the error handler to show a blank screen instead of the
error.
Fixed a Maximum Hole size error when checking for large
holes and pipes.
Build 7.1.42 April 20, 2018
Customer build.
Build 7.1.41 April 19, 2018
Customer build.
Build 7.1.40 April 13, 2018
Customer build.
Build 7.1.39 April 4, 2018
Customer build.
Build 7.1.38 April 2, 2018
Added a command line switch -ShowOpenPDF to turn on the Open
PDF pull down menu entry when MH Pro is served via Remote
Desktop Services (terminal services).
Build 7.1.37 March 26, 2018
Customer build.
Build 7.1.36 March 21, 2018
Customer build.
Build 7.1.35 March 19, 2018
Customer build.
Build 7.1.34 March 13, 2018
Customer build.
Build 7.1.33 March 8, 2018
Customer build.
Build 7.1.32 March 8, 2018
Customer build.
Build 7.1.31 February 28, 2018
Customer build.
Build 7.1.30 February 27, 2018
Bug Fixes:
Eliminate Nulls when upgrading Quote Section, Quote Sub
Section, and Pipe Features fields.
Build 7.1.29 February 15, 2018
Added filters to the Job screen so that the job list can be
quickly filtered by Job Name, Job Number, Contractor Name, or
Estimator Name.
Build 7.1.28 February 6, 2018
Customer build.
Build 7.1.27 February 5, 2018
Customer build.
Build 7.1.26 January 29, 2018
Customer build.
Build 7.1.25 January 24, 2018
Status screen can be filtered by severity.
Bug Fixes:
Fixed a bug that reduced the size of company logos on
reports when running windows 10 at a zoom factor above
100%.
Build 7.1.24 January 19, 2018
Customer build.
Build 7.1.23 January 16, 2018
Customer build.
Build 7.1.22 January 12, 2018
Customer build.
Build 7.1.21 January 3, 2018
Customer build.
Build 7.1.20 December 27, 2017
Customer build.
Build 7.1.19 December 22, 2017
Customer build.
Build 7.1.18 December 21, 2017
Customer build.
Build 7.1.17 December 19, 2017
Reworked Icons to support larger displays and resolutions.
Bug Fixes:
Fixed an "Invalid Row Value" error when attempting to
use the mouse wheel in the Status screen of an empty
table.
Build 7.1.16 December 11, 2017
Customer build.
Build 7.1.15 November 22, 2017
Customer build.
Build 7.1.14 November 21, 2017
Customer build.
Build 7.1.13 November 20, 2017
Customer build.
Build 7.1.12 November 8, 2017
Bug Fixes:
When re-copying a reference structure on the Job Edit
screen, also re-copy the reference structure's frame and
grate.
Build 7.1.11 November 6, 2017
Customer build.
Build 7.1.10 October 23, 2017
Customer build.
Build 7.1.09 October 19, 2017
Customer build.
Build 7.1.08 October 13, 2017
Customer build.
Build 7.1.07 October 9, 2017
Bug Fixes:
Fixed an "Item cannot be found" error in Miscellaneous
Items when selecting a reference structure.
Build 7.1.06 September 28, 2017
Customer build.
Build 7.1.05 September 26, 2017
Customer build.
Build 7.1.04 September 20, 2017
Customer build.
Build 7.1.03 September 19, 2017
Customer build.
Build 7.1.02 September 12, 2017
Customer build.
Build 7.1.01 September 7, 2017
Customer build.
Build 7.1.00 September 1, 2017
Customer build.
Build 7.0.99 August 31, 2017
Customer build.
Build 7.0.98 August 29, 2017
Customer build.
Build 7.0.97 August 28, 2017
Customer build.
Build 7.0.96 August 23, 2017
Customer build.
Build 7.0.95 August 19, 2017
Customer build.
Build 7.0.94 August 16, 2017
Bug Fixes:
Fixed the generation of Slope setup dimension so
it does not overlap the overall piece dimension.
Build 7.0.93 August 11, 2017
Bug Fixes:
Slayed a few more 'Operation was Cancelled' errors in
the Fab. Steel & Cast Iron screen.
Build 7.0.92 August 8, 2017
Customer build.
Build 7.0.91 August 7, 2017
Customer build.
Build 7.0.90 July 27, 2017
Customer build.
Build 7.0.89 July 25, 2017
Customer build.
Build 7.0.88 July 18, 2017
Added a new "Inverted Pour" control to the Stack Editor
screen to allow explicit control of pour orientation on
shop reports.
Build 7.0.87 July 17, 2017
Customer build.
Build 7.0.86 July 12, 2017
Customer build.
Build 7.0.85 July 6, 2017
Customer build.
Build 7.0.84 June 30, 2017
Customer build.
Build 7.0.83 June 27, 2017
Customer build.
Build 7.0.82 June 20, 2017
Customer build.
Build 7.0.81 June 16, 2017
Customer build.
Build 7.0.80 June 15, 2017
Customer build.
Build 7.0.79 June 2, 2017
Customer build.
Build 7.0.78 May 26, 2017
Customer build.
Build 7.0.77 May 18, 2017
Added a new "Joint Seal Source" control to the Details
tab on the Job Data screen for controlling who provides
the Joint Seal for the job.
Build 7.0.76 May 15, 2017
Customer build.
Build 7.0.75 May 12, 2017
Customer build.
Build 7.0.74 May 9, 2017
Customer build.
Build 7.0.73 May 6, 2017
Customer build.
Build 7.0.72 May 5, 2017
Added BottomSizeOverride and TopSizeOverride to the Stack
Editor screen. While you can use this for good or for
awesome, please use it for good.
Build 7.0.71 April 28, 2017
Customer build.
Build 7.0.70 April 28, 2017
Customer build.
Build 7.0.69 April 25, 2017
Customer build.
Build 7.0.68 April 24, 2017
Added a new 'Field Elevation Location' control to the Pipe
Options screen so that water main and force main pipes can
specify their Field Elevation at the pipe centerline instead
of the bottom inside of pipe.
Build 7.0.67 April 14, 2017
Customer build.
Build 7.0.66 April 7, 2017
Customer build.
Build 7.0.65 April 4, 2017
Now the unselected name for Frame, Grate, End, and Hole is
a blank entry.
Bug Fixes:
The behavior for a New Structure opening in the
Structure screen once again copies the outlet pipe's
data to the opening when *Same As Outlet* is selected.
Build 7.0.64 March 31, 2017
The POS input form can now specify that an opening
connects to a new upstream structure. Now you can input
an entire line of structures without leaving the POS.
Bug Fixes:
Fixed a bug in calculating channel weight for bases
with separate pours for slab, wall, and channel.
Build 7.0.63 March 28, 2017
Customer build.
Build 7.0.62 March 16, 2017
Bug Fixes:
Fixed a data display and selection issue when a text
field was a substring of another valid entry.
Fixed a issue when converting an ad-hoc opening to
an opening to structure that would replace selected
pipe with the outlet pipe if the pipe was not in the
pipe library.
Build 7.0.61 March 15, 2017
Customer build.
Build 7.0.60 March 14, 2017
Customer build.
Build 7.0.59 March 8, 2017
Sumps have always been ignored when the structure will
have a flow channel, but now MH Pro tells you that it is
ignoring the entered sump.
Bug Fixes:
Pipe-In-Slab checks are better and report the name of
piece with the conflicting slab.
Build 7.0.58 February 27, 2017
Customer build.
Build 7.0.57 February 14, 2017
Bug Fixes:
Fixed SQL query builder so SQLServer databases can be
upgraded.
Build 7.0.56 February 10, 2017
Customer build.
Build 7.0.55 February 7, 2017
Customer build.
Build 7.0.54 February 3, 2017
Customer build.
Build 7.0.53 February 2, 2017
Customer build.
Build 7.0.52 February 1, 2017
Customer build.
Build 7.0.51 January 24, 2017
Now stock parts for Pieces Available in the Stack Editor
screen use a bold font for the part description.
Bug Fixes:
Fixed the ability to Release a structure that was
inadvertently broken in version 7.0.50.
Build 7.0.50 January 17, 2017
Customer build.
Build 7.0.49 January 12, 2017
Customer build.
Build 7.0.48 January 10, 2017
Customer build.
Build 7.0.47 December 8, 2016
Enhanced library selections so that entered text now matches
any text in the rows, not just the beginning text in a row.
This should make it easier to find a desired entry in a
list.
Bug Fixes:
Consistently draw the top of wall dimension on the
elevation view for weir walls.
Build 7.0.46 December 1, 2016
Customer build.
Build 7.0.45 November 18, 2016
Customer build.
Build 7.0.44 November 14, 2016
Customer build.
Build 7.0.43 November 7, 2016
Customer build.
Build 7.0.42 November 2, 2016
Bug Fixes:
Fixed an SQL Server upgrade error.
Build 7.0.41 October 31, 2016
Added Chipped opening graphics for green scratched
openings.
Bug Fixes:
Fixed a bug that left bad pricing entries in place
when changing remote library databases.
The Rollout view now prefers to document openings at
zero degrees rather than at 360 degrees.
Fixed a "duplicate values in the index" error in
Library Cache Update.
Build 7.0.40 October 18, 2016
Customer build.
Build 7.0.39 October 14, 2016
Customer build.
Build 7.0.38 October 3, 2016
Bug Fixes:
Fixed an embarrassing first time startup error.
"You only get one chance at making a good first impression."
And we blew it.
Build 7.0.37 September 30, 2016
Bug Fixes:
Job migration now checks to make sure that only one job
is migrated at a time.
Build 7.0.36 September 27, 2016
Customer build.
Build 7.0.35 September 8, 2016
When a new version of MH Pro! is installed, now the user
has the option to upgrade the existing database as opposed to
creating a new one and migrating all the libraries and jobs.
Build 7.0.34 September 2, 2016
Customer build.
Build 7.0.33 August 22, 2016
Customer build.
Build 7.0.32 August 15, 2016
Customer build.
Build 7.0.31 August 12, 2016
Customer build.
Build 7.0.30 August 3, 2016
Customer build.
Build 7.0.29 August 1, 2016
Customer build.
Build 7.0.28 July 29, 2016
Customer build.
Build 7.0.27 July 18, 2016
Customer build.
Build 7.0.26 July 8, 2016
Customer build.
Build 7.0.25 July 5, 2016
Customer build.
Build 7.0.24 June 29, 2016
Customer build.
Build 7.0.23 June 22, 2016
Bug Fixes:
Rearranging bugs around the "Error 5000" on
reports.
Build 7.0.22 June 21, 2016
Bug Fixes:
Fixed some graphical defects when drawing holes
through the side walls of structures.
Hole dims are now more reliably positioned.
Build 7.0.21 June 17, 2016
Bug Fixes:
Added code to reduce the "Error 5000" from occurring
when generating reports.
Build 7.0.20 June 3, 2016
Customer build.
Build 7.0.19 May 26, 2016
Reworked the Structure Limit so that No Limit is
explicitly marked "Not Recommended".
Build 7.0.18 May 23, 2016
Bug Fixes:
Fixed a memory leak related to generating reports.
Build 7.0.17 May 16, 2016
Bug Fixes:
Fixed weight calculations for Weir Walls so the
thickness is based on Hole Span, not Hole Rise.
Build 7.0.16 May 10, 2016
Bug Fixes:
Fixed an error drawing special pieces in the Plan
view.
Build 7.0.15 May 6, 2016
Bug Fixes:
Data migration now handles more than 20 jobs at a
time from an Access database to an Access database.
Build 7.0.14 May 5, 2016
Customer build.
Build 7.0.13 April 29, 2016
Customer build.
Build 7.0.12 April 28, 2016
Customer build.
Build 7.0.11 April 26, 2016
Customer build.
Build 7.0.10 April 25, 2016
Bug Fixes:
De-conflicted overall dimensions on top slabs from
stepping on the slab dimensions.
Control Left Mouse click now starts measuring. This
should make it possible to workaround Citrix XenApp
issues when switching from the hand cursor to the
cross cursor.
Build 7.0.09 April 11, 2016
Customer build.
Build 7.0.08 March 31, 2016
Customer build.
Build 7.0.07 March 22, 2016
Ctrl-Delete now deletes entries in most tables.
Pricing now warns about unstacked structures when a
stack is required to generate a price.
Build 7.0.06 March 10, 2016
Customer build.
Build 7.0.05 March 9, 2016
Customer build.
Build 7.0.04 February 16, 2016
The butterfly view now does a better job of documenting
only the openings in each view.
Skew openings can now document the face width of holes
instead of the width of the equivalent squared hole in
box structures.
Build 7.0.03 January 29, 2016
Customer build.
Build 7.0.02 January 25, 2016
Customer build.
Build 7.0.01 January 20, 2016
Customer build.
Build 7.0.00 January 18, 2016
MHProEZ is now MHPro.
Build 6.1.96 January 12, 2016
Customer build.
Build 6.1.95 January 8, 2016
Added new Eccentricity parameters, ICL and OCL, to position
the top opening centerline relative to the Inside or Outside
wall of the piece.
Bug Fixes:
Quieted chatter on the Pipe screen that was marking the
first pipe as changed even though nothing had changed.
Build 6.1.94 December 30, 2015
Customer build.
Build 6.1.93 December 30, 2015
Customer build.
Build 6.1.92 December 22, 2015
Customer build.
Build 6.1.91 December 16, 2015
Customer build.
Build 6.1.90 December 12, 2015
Customer build.
Build 6.1.89 December 2, 2015
Customer build.
Build 6.1.88 November 23, 2015
Customer build.
Build 6.1.87 November 18, 2015
Customer build.
Build 6.1.86 October 26, 2015
Customer build.
Build 6.1.85 October 21, 2015
Customer build.
Build 6.1.84 October 8, 2015
Customer build.
Build 6.1.83 October 5, 2015
Customer build.
Build 6.1.82 September 28, 2015
Customer build.
Build 6.1.81 September 24, 2015
Start up windows can now be selected to your preferred
configuration.
Build 6.1.80 September 2, 2015
Customer build.
Build 6.1.79 August 31, 2015
Customer build.
Build 6.1.78 August 19, 2015
Customer build.
Build 6.1.77 August 7, 2015
Customer build.
Build 6.1.76 August 4, 2015
Customer build.
Build 6.1.75 July 28, 2015
The Structure Design Screen now has a new 'Plan View Angle'
field for controlling the orientation of the Plan View for
reporting.
Build 6.1.74 July 20, 2015
Bug Fixes:
Do not reset Cache Library tables when using a remote
library.
Build 6.1.73 July 20, 2015
Customer build.
Build 6.1.72 July 15, 2015
Customer build.
Build 6.1.71 July 13, 2015
Bug Fixes:
Fixed a bug in drawings frames cast into the top of
a riser.
Build 6.1.70 June 29, 2015
The gross weight of weir walls are now included in
the weight of each piece.
Adjusting Rings can be set to be ByOthers at the Job
or Structure level. Now the same reference structures can
be used regardless of who supplies the grade rings.
Build 6.1.69 June 24, 2015
Customer build.
Build 6.1.68 June 20, 2015
Customer build.
Build 6.1.67 June 15, 2015
Customer build.
Build 6.1.66 June 9, 2015
Customer build.
Build 6.1.65 June 8, 2015
Customer build.
Build 6.1.64 June 8, 2015
Customer build.
Build 6.1.63 June 5, 2015
Customer build.
Build 6.1.62 May 29, 2015
Customer build.
Build 6.1.61 May 19, 2015
Customer build.
Build 6.1.60 May 18, 2015
Customer build.
Build 6.1.59 May 15, 2015
Customer build.
Build 6.1.58 May 14, 2015
Customer build.
Build 6.1.57 May 7, 2015
The Platforms Screen now has a new 'Max Steps Second Side'
field for controlling steps above a platform.
Build 6.1.56 May 4, 2015
Customer build.
Build 6.1.55 April 22, 2015
Bug Fixes:
Fixed a bug that blocked data entry on the Job Edit
screen
Build 6.1.54 April 15, 2015
Stack BOMs now draw horizontal lines to separate the
ad hoc items from the items included in the totals.
MH Pro now calculates a conservative floatation safety
factor for every structure.
Build 6.1.53 April 9, 2015
Customer build.
Build 6.1.52 March 31, 2015
Customer build.
Build 6.1.51 March 23, 2015
Customer build.
Build 6.1.50 March 19, 2015
Customer build.
Build 6.1.49 March 16, 2015
Customer build.
Build 6.1.48 March 11, 2015
Customer build.
Build 6.1.47 March 10, 2015
Customer build.
Build 6.1.46 February 28, 2015
Customer build.
Build 6.1.45 February 25, 2015
Customer build.
Build 6.1.44 February 20, 2015
Customer build.
Build 6.1.43 February 18, 2015
Customer build.
Build 6.1.42 February 10, 2015
Customer build.
Build 6.1.41 February 2, 2015
Customer build.
Build 6.1.40 February 2, 2015
Customer build.
Build 6.1.39 January 28, 2015
Customer build.
Build 6.1.38 January 20, 2015
Customer build.
Build 6.1.37 December 23, 2014
Customer build.
Build 6.1.36 December 20, 2014
Customer build.
Build 6.1.35 December 15, 2014
Customer build.
Build 6.1.34 December 11, 2014
Customer build.
Build 6.1.33 November 14, 2014
Bug Fixes:
Fixed a bug that dimensioned top openings without moving
the dimension to the CenterOffset.
Build 6.1.32 November 7, 2014
Customer build.
Build 6.1.31 November 4, 2014
Customer build.
Build 6.1.30 October 30, 2014
Customer build.
Build 6.1.29 October 17, 2014
Customer build.
Build 6.1.28 October 6, 2014
Code 128 barcodes can now be included in title blocks.
Bug Fixes:
MHPro no longer generates an error when reading from a
ReadOnly .mhpro save file.
Report export functions no longer generate an error when
an output file is locked.
MH Pro now warns and truncates data when migrating data
from a large field size to a smaller size. This only
occurs when reading from a newer MHPro database into an
older database -- which is still a bad idea.
Build 6.1.27 September 24, 2014
Customer build.
Build 6.1.26 September 23, 2014
Bug Fixes:
Fixed a bug on the pipe options screen that popped on
inlet openings.
Build 6.1.25 September 16, 2014
Title block text can now be colored.
Bug Fixes:
Fixed a subscript out of range error when clicking on
the Pipe screen.
Build 6.1.24 August 27, 2014
Customer build.
Build 6.1.23 August 25, 2014
Bug Fixes:
TOC to Outlet dimensioning is now longer as screwed up
as it was.
Build 6.1.22 August 18, 2014
Customer build.
Build 6.1.21 August 13, 2014
Customer build.
Build 6.1.20 August 6, 2014
Bug Fixes:
Some PDF mark up tools do not understand the dashed
line fonts MH Pro has used, so now dashed lines are drawn
as multiple short solid lines.
Build 6.1.19 July 30, 2014
Customer build.
Build 6.1.18 July 29, 2014
Bug Fixes:
Channels in the Plan View now draw more stably.
Build 6.1.17 July 22, 2014
Floor sumps can now specify the sump depth as the third size
parameter on the Hole Size (12x12x6w).
Selection lists in the Job Edit Screen now support mouse
wheel scrolling.
Bug Fixes:
Fixed an error related to the 'Undo Copy' button in the
Job Edit Screen.
Build 6.1.16 July 15, 2014
Customer build.
Build 6.1.15 July 10, 2014
Center Offset now supports eccentric box openings with a new
SQ eccentric placement keyword.
Bug Fixes:
Address scrolling issues on the Job Edit screen.
Build 6.1.14 July 2, 2014
Customer build.
Build 6.1.13 June 30, 2014
Customer build.
Build 6.1.12 June 26, 2014
Customer build.
Build 6.1.11 June 23, 2014
Customer build.
Build 6.1.10 June 11, 2014
Quotation reports can now include sales tax.
Added an option to turn off the words "Selected" and
"et. al." in the default report filenames.
Build 6.1.09 June 10, 2014
Customer build.
Build 6.1.08 June 6, 2014
Customer build.
Build 6.1.07 June 5, 2014
Customer build.
Build 6.1.06 May 30, 2014
Customer build.
Build 6.1.05 May 28, 2014
Contractor, Pipe, and Frame libraries now require the user
to click Edit or Add before changing data. Hopefully this will
reduce the number of times the first entry is edited when a
new record was wanted.
Bug Fixes:
Properly set StepAngle in structures with mixed round
and box parts.
Build 6.1.04 May 27, 2014
Bug Fixes:
Fixed Vent Pipe access opening steps so that they follow
the opening angle instead of defaulting to 90 degrees off
the main steps in the structure.
Build 6.1.03 May 16, 2014
Customer build.
Build 6.1.02 May 14, 2014
Customer build.
Build 6.1.01 May 11, 2014
Customer build.
Build 6.0.99 May 7, 2014
Customer build.
Build 6.0.98 May 4, 2014
Handle structures that are designed with Top of Casting well
above the Top of Grade (negative Leave Short).
AutoStacking can now retry when the structure is deep or
shallow as defined by HeightLimitMaxFT and the build
height.
Build 6.0.97 May 1, 2014
Extended 'Center Offset' and 'Center Offset 2' on the Stack
Editor Screen to use literal abbreviations (ECC, IECC, and
OECC) for offsetting an opening. Now an 'ANY' opening size in
a top slab can be quickly offset using one of these
literals.
Build 6.0.96 April 14, 2014
OutsideDropStyle and InsideDropStyle now have a Not Allowed
option that generates an error if the forbidden drop style is
specified.
Revision Number can now be a letter value, not just
numeric.
Build 6.0.95 April 11, 2014
Customer build.
Build 6.0.94 April 8, 2014
Customer build.
Build 6.0.93 April 5, 2014
Customer build.
Build 6.0.92 March 25, 2014
The Height Increment used by variable height pieces can now
be overridden on the structure design screen without creating
new part templates.
Build 6.0.91 March 18, 2014
MH Pro now supports in-situ database upgrading of server
databases to the current version.
MH Pro now has understands and automatically increments a
structure Revision Number each time a structure goes through a
Revised Submittal or Revised Release state.
Bug Fixes:
Under unusual conditions MHPro confused Opening Graphic
with Pipe Rating.
Build 6.0.90 March 10, 2014
Customer build.
Build 6.0.89 March 4, 2014
Customer build.
Build 6.0.88 February 26, 2014
Steps can now be precisely controlled in individual pieces
using the Piece Editor screen.
Build 6.0.87 February 21, 2014
Customer build.
Build 6.0.86 February 18, 2014
Bug Fixes:
MH Pro now warns before stacking structures deeper than
50' when using auto stacking on the Structure or Job Edit
screens. This fixes a bug that allowed data entry errors
to generate 2000 foot structures.
Build 6.0.85 February 6, 2014
Customer build.
Build 6.0.84 February 4, 2014
Customer build.
Build 6.0.83 January 31, 2014
Customer build.
Build 6.0.82 January 29, 2014
Customer build.
Build 6.0.81 January 28, 2014
Customer build.
Build 6.0.80 January 27, 2014
Customer build.
Build 6.0.79 January 23, 2014
Customer build.
Build 6.0.78 January 22, 2014
Pipe Rating can be specified on the Structure screen. Now
the pipe library can have just one entry for each Pipe and
Connector combination.
Build 6.0.77 January 15, 2014
Customer build.
Build 6.0.76 January 13, 2014
Step Top Limit can now reference the floor or top of the
base so that only the base has steps.
Build 6.0.75 January 3, 2014
Customer build.
Build 6.0.74 December 31, 2013
New MHProStructureCount program generates summary statistics
of the structures created, stacked, and released each
year.
Bug Fixes:
Pipes in concrete pieces provided by others are
greyed.
Build 6.0.73 December 16, 2013
Customer build.
Build 6.0.72 December 10, 2013
For users that have PartNumbers that are generated by lookup
and measurement tokens, MH Pro now allows fine control of the
PartNumberHints tokens on the Stack Editor.
Build 6.0.71 December 4, 2013
Per Yard and Per Ton pricing can now be differentiated by
size.
Since using the unnamed price list for pricing is a bad
idea, MH Pro now complains if you try to price items on the
unnamed price list.
Build 6.0.70 November 26, 2013
Bug Fixes:
Fixed a bug on the Migration Screen.
Build 6.0.69 November 21, 2013
Customer build.
Build 6.0.68 November 20, 2013
Test build.
Build 6.0.67 November 20, 2013
Buttons are now shaded a darker gray and they change color
when the mouse hovers over them.
Build 6.0.66 November 14, 2013
MH Pro now works with 'read only' Program Files
directories.
Added a new 'Structure Limit Message' menu to the Options
menu for controlling the '100 structures in a job'
behavior.
Build 6.0.65 November 1, 2013
Test build.
Build 6.0.64 October 31, 2013
Added a new Pipe and Openings screen to the Structure screen
to set per opening options.
Bug Fixes:
Plant selection is now stored on a per-user basis. This
means that multi-plant users will never see the plant
change without making an explicit selection.
Miscellaneous bug fixes to Link Data, Structure Add, and
report windows.
Build 6.0.63 October 25, 2013
Bug Fixes:
Fixed a bug that re-copied the reference structure when
an opening is added on the Job Edit screen.
Build 6.0.62 October 22, 2013
Customer Build.
Build 6.0.61 October 21, 2013
Customer Build.
Build 6.0.60 October 20, 2013
End Walls can now be selected on the Job Edit screen.
Bug Fixes:
The "Above Large Pipes" reduction style now does a
better job of deciding what a large pipe is.
Build 6.0.59 October 16, 2013
Bug Fixes:
Slayed a few more 'Operation was Cancelled' errors in
the Pipe Screen.
Fixed oversize holes in box structures so that doghouse
openings draw without error.
Build 6.0.58 October 11, 2013
Added a new 'AutoStack' Button for stacking a structure, and
moved the POS button to the right of the Top of Casting field
to make room for the new AutoStack button.
Bug Fixes:
Fixed Sump and Through Floor openings so that they draw
in the Elevation View.
Build 6.0.57 October 9, 2013
Customer Build.
Build 6.0.56 October 1, 2013
Added new controls to the General Tab of the Structure
Design Screen for controlling the placement of steps from the
bottom of the structure, see 'Step Bottom Limit' and 'Omit
Above Base By' controls.
Build 6.0.55 September 26, 2013
Customer build.
Build 6.0.54 September 26, 2013
The rollout view now does a better job of showing parts with
a base pour.
Build 6.0.53 September 24, 2013
Bug Fixes:
Fixed a vexing "Operation Cancelled" error on the Pipe
screen.
Build 6.0.52 September 19, 2013
The new Add'l Thickness control on the Structure Design
screen can be used to specify the 1st pour base thickness
before a structure is stacked.
Per Ton and Per Yard pricing can use company
measurements.
Page numbers can be turned off on reports.
The Job screen now has columns for Submitted, Cancelled, and
Quoted structure counts.
Bug Fixes:
The Pipe Fitting library screen now knows about windows
fonts.
Build 6.0.51 September 10, 2013
Customer build.
Build 6.0.50 September 4, 2013
Customer build.
Build 6.0.49 August 22, 2013
Customer build.
Build 6.0.48 August 14, 2013
Customer build.
Build 6.0.47 August 13, 2013
Customer build.
Build 6.0.46 August 12, 2013
Customer build.
Build 6.0.45 August 9, 2013
Customer build.
Build 6.0.44 August 9, 2013
Customer build.
Build 6.0.43 August 7, 2013
Customer build.
Build 6.0.42 August 6, 2013
Customer build.
Build 6.0.41 August 5, 2013
Improved the performance of the Pricing Screen by limiting
the display of pricing entries. By default, just the job's
price list entries are displayed. As additional price lists
are selected, the screen keeps track of the selected price
list entries and displays both the job's and selected price
list entries.
Bug Fixes:
The Structure Screen no longer wipes out inputs when a
reference structure with openings is selected.
Build 6.0.40 July 22, 2013
Customer build.
Build 6.0.39 July 18, 2013
Clay Bells can be drawn on openings in the plan view.
Build 6.0.38 July 18, 2013
Customer build.
Build 6.0.37 July 17, 2013
Customer build.
Build 6.0.36 July 16, 2013
Customer build.
Build 6.0.35 July 15, 2013
Customer build.
Build 6.0.34 July 10, 2013
Customer build.
Build 6.0.33 July 10, 2013
Customer build.
Build 6.0.32 July 8, 2013
Customer build.
Build 6.0.31 July 5, 2013
Most data grids now store their current sort parameters and
restore them when re-opened.
Bug Fixes:
Integral outside drops now draw at the outside elevation
of each piece, not to the reference elevation.
Build 6.0.30 July 2, 2013
Customer build.
Build 6.0.29 June 21, 2013
Customer build.
Build 6.0.28 June 19, 2013
The Flow Tree allows deleting all checked structures.
Bug Fixes:
Fixed a bug in Autostacking mis-designed structures that
would allow zero height elements to stack on top of each
other until all memory is exhausted.
Build 6.0.27 June 13, 2013
Customer build.
Build 6.0.26 June 7, 2013
Custom structure sizes can now be set on the Job Edit
Screen.
Bug Fixes:
Fixed duplicate Slab Pour pricing entries.
Build 6.0.25 June 4, 2013
Customer build.
Build 6.0.24 May 30, 2013
Customer build.
Build 6.0.23 May 21, 2013
MH Pro now draws both sets of pieces above a twin opening
piece.
Build 6.0.22 May 15, 2013
Customer build.
Build 6.0.21 May 11, 2013
The Unsaved Changes dialogs now names one of the unsaved
items.
Build 6.0.20 May 10, 2013
Customer build.
Build 6.0.19 May 3, 2013
Customer build.
Build 6.0.18 April 24, 2013
Customer build.
Build 6.0.17 April 19, 2013
The Rollout view now draws steps using the same data that
the Plan and Elevation views use.
Build 6.0.16 April 5, 2013
Customer build.
Build 6.0.15 April 5, 2013
Bug Fixes:
Fixed issues with SQL Server data migration.
Again.
Build 6.0.14 April 4, 2013
Bug Fixes:
Fixed issues with SQL Server data migration.
Build 6.0.13 April 2, 2013
Autostacking now has a re-try mode that allows reference
structures to loosen constraints if the original, tighter
constraints produced no viable stacks.
MH Pro can now replace joint gaskets with mastic when a lap
joint is used instead of a spigot joint.
Reports can now choose whether to use the selling plant's
logo or the manufacturing plant's logo.
Engineer Name can now be used in the title block of most
reports.
Bug Fixes:
MHPro now understands that SQL Server has two
authentication modes, Windows login and SQL Server user
and password.
Build 6.0.12 March 21, 2013
Customer build.
Build 6.0.11 March 15, 2013
Customer build.
Build 6.0.10 March 13, 2013
Customer build.
Build 6.0.09 March 13, 2013
Customer build.
Build 6.0.08 March 12, 2013
Customer build.
Build 6.0.07 February 28, 2013
Customer build.
Build 6.0.06 February 21, 2013
Customer build.
Build 6.0.05 February 19, 2013
Bug Fixes:
Fixed opening naming issues on descriptive hole
callouts.
Build 6.0.04 February 18, 2013
Customer build.
Build 6.0.03 February 18, 2013
Customer build.
Build 6.0.02 February 16, 2013
Customer build.
Build 6.0.01 February 15, 2013
Replaced the "Show only items used by this structure" check
box with a new Show Pricing For selection list that controls
whether prices are shown for the Structure (current
structure), Job (all structures in the job), or All (all price
list entries.)
Build 6.0.00 February 6, 2013
Initial Multi-plant build.
Build 5.0.93 February 11, 2013
Customer build.
Build 5.0.92 January 29, 2013
Customer build.
Build 5.0.91 January 28, 2013
Customer build.
Build 5.0.90 January 21, 2013
Bug Fixes:
Fixed an annoying structure rename bug.
Build 5.0.89 January 15, 2013
Customer build.
Build 5.0.88 December 26, 2012
Customer build.
Build 5.0.87 December 17, 2012
Customer build.
Build 5.0.86 December 14, 2012
Bug Fixes:
Fix a critical installation error in MHPro 5.0.85.
Build 5.0.85 December 12, 2012
Customer build.
Build 5.0.84 December 5, 2012
Customer build.
Build 5.0.83 November 28, 2012
Customer build.
Build 5.0.82 November 27, 2012
Bug Fixes:
Fixed a bug on the Stack Edit screen that would not save
piece notes when using a postgreSQL database.
Holes with Opening Graphics do a better job of
dimensioning on the Butterfly view.
Build 5.0.81 November 20, 2012
Customer build.
Build 5.0.80 November 14, 2012
AutoStacking can now be invoked from the Job Edit screen.
The "best" stack as calculated by Goodness is selected.
Shop reports can now generate a single page for identical
pieces on a report with a note for the number required.
Build 5.0.79 October 29, 2012
Customer build.
Build 5.0.78 November 5, 2012
Elongated face holes now dimension the elongation even when
the hole extends beyond the limits of the inside walls.
Build 5.0.77 October 29, 2012
Customer build.
Build 5.0.76 October 26, 2012
Customer build.
Build 5.0.75 October 22, 2012
Customer build.
Build 5.0.74 October 18, 2012
Customer build.
Build 5.0.73 October 10, 2012
Customer build.
Build 5.0.72 October 3, 2012
PostgreSQL multi-user testing and implementation.
The Job Edit screen can now be navigated using Tab and Shift
Tab to move between input cells.
Step spacing dimensions can now be shown on the elevation
view.
Build 5.0.71 September 25, 2012
Bug Fixes:
Fixed a problem with migrating Pricing data where the
production field length was too small for the migrated
data.
Build 5.0.70 September 24, 2012
Customer build.
Build 5.0.69 September 14, 2012
Customer build.
Build 5.0.68 September 11, 2012
PostgreSQL and SQL Server database support is available for
testing.
Build 5.0.67 August 31, 2012
Customer build.
Build 5.0.66 August 27, 2012
Customer build.
Build 5.0.65 August 17, 2012
Internal build for testing.
Build 5.0.64 August 16, 2012
Doghouse openings are now recommended when an opening is
near a separate base or poured in field base.
Bug Fixes:
Eliminated duplicate explorer windows when saving
multiple reports to the same directory.
Build 5.0.63 August 1, 2012
Customer build.
Build 5.0.62 July 20, 2012
Customer build.
Build 5.0.61 June 18, 2012
The Migration Screen now supports sorting jobs.
Bug Fixes:
Fixed a bug when adding a pipe library entry with the
Pipe Filter selected.
Build 5.0.60 July 13, 2012
Customer build.
Build 5.0.59 July 9, 2012
Customer build.
Build 5.0.58 June 29, 2012
Customer build.
Build 5.0.57 June 15, 2012
Customer build.
Build 5.0.56 June 13, 2012
Bug Fixes:
Fixed an error that occurred when attempting to select a
remote library database with no libraries.
Build 5.0.55 June 7, 2012
Output actions can now be specified for CSV, XLS, and XML
files. Available actions are: Open the file for viewing or
editing, Show the file selected in windows explorer, or do
nothing. No you do not have to wait for excel to start up when
you just wanted to email the file.
Bug Fixes:
Fix a duplicate field error in End migration.
Build 5.0.54 June 6, 2012
Customer build.
Build 5.0.53 May 30, 2012
Customer build.
Build 5.0.52 May 25, 2012
Customer build.
Build 5.0.51 May 17, 2012
Customer build.
Build 5.0.50 May 16, 2012
Customer build.
Build 5.0.49 May 9, 2012
Customer build.
Build 5.0.48 May 8, 2012
Customer build.
Build 5.0.47 May 4, 2012
Customer build.
Build 5.0.46 May 1, 2012
The default input units can now be set as an option.
The Graphic Height for frames now changes the cover/grate
thickness.
The Job Edit screen now has Copy Structure and Copy Opening
buttons.
A new step placement of Auto45 is available.
Bug Fixes:
Input selection on the Job Edit screen no longer
requires two clicks.
Library data migration now will not create duplicate
entries when the same name is defined with different
attributes in both the current and old libraries.
Build 5.0.45 April 20, 2012
Customer build.
Build 5.0.44 April 17, 2012
Customer build.
Build 5.0.43 April 12, 2012
Customer build.
Build 5.0.42 April 9, 2012
Bug Fixes:
Fixed migrated structures so that they maintain their
association with the downstream structure - version 5.0.41
broke this association.
Fixed Connector Models so that they can be
selected.
Build 5.0.41 April 3, 2012
Customer build.
Build 5.0.40 April 2, 2012
An integral drop with a wye now draws a wye instead of a
tee.
Bug Fixes:
Callouts and chained dimensions on the Rollout View now
move to the other side when two openings are at the same
angle.
Build 5.0.39 March 15, 2012
Customer build.
Build 5.0.38 March 12, 2012
The Rollout view can now display chained angles and
distances between openings.
Integral Drop bottom openings now display the encased elbow
size.
Build 5.0.37 March 7, 2012
Customer build.
Build 5.0.36 February 22, 2012
Customer build.
Build 5.0.35 February 20, 2012
Customer build.
Build 5.0.34 February 9, 2012
The Job Edit Screen now copies the optional reference
structure data (Frame, Grate, Sump, Ecc. Angle) that the
Structure Screen copies. The Job Edit Screen also has a new
sub-menu on the popup menu to control which optional items are
copied with the selection of a reference structure.
Build 5.0.33 February 6, 2012
Customer build.
Build 5.0.32 February 2, 2012
Customer build.
Build 5.0.31 January 26, 2012
Customer build.
Build 5.0.30 January 19, 2012
The Job Edit screen now has a Unify all Structures menu item
to propagate a setting to all structures in the job.
Build 5.0.29 January 13, 2012
Customer build.
Build 5.0.28 January 12, 2012
Customer build.
Build 5.0.27 January 6, 2012
Customer build.
Build 5.0.26 December 27, 2011
The Structure Design screen has been reorganized to add a
Stacking tab for the stack and joint control inputs.
Build 5.0.25 December 21, 2011
Customer build.
Build 5.0.24 December 20, 2011
Customer build.
Build 5.0.23 December 15, 2011
Customer build.
Build 5.0.22 December 13, 2011
Customer build.
Build 5.0.21 December 9, 2011
Customer build.
Build 5.0.20 December 6, 2011
Added a new "Force Assembly Stock" option to the Piece
Source field on the Stack Editor Screen. Selecting this
option forces the part and its associated features to be
treated as if they were stock for pricing purposes.
Build 5.0.19 December 1, 2011
Customer build.
Build 5.0.18 November 18, 2011
Customer build.
Build 5.0.17 November 15, 2011
Customer build.
Build 5.0.16 November 14, 2011
Customer build.
Build 5.0.15 November 8, 2011
Customer build.
Build 5.0.14 November 3, 2011
Customer build.
Build 5.0.13 October 24, 2011
Customer build.
Build 5.0.12 October 18, 2011
Customer build.
Build 5.0.11 October 14, 2011
Customer build.
Build 5.0.10 October 12, 2011
Added a new "Elevations Are CL" control to the General tab
of the Structure Design Screen so that elevations can be
specified as being to the center of the structure or the
inside wall of the structure.
Bug Fixes:
The Stack Editor now keeps track of the currently
selected piece when you apply changes.
Build 5.0.09 October 4, 2011
Bug Fixes:
The prompt for Vent Pipe was not supposed to be
In Manhole Tee.
Build 5.0.08 September 30, 2011
Added a Steps Required control to the Structure Screen so
that steps can be turned on or off on the Structure
Screen.
Build 5.0.07 September 22, 2011
Customer build.
Build 5.0.06 September 20, 2011
Customer build.
Build 5.0.05 September 16, 2011
Customer build.
Build 5.0.04 September 12, 2011
Channel drawing routines are now more robust in dealing with
parallel openings in channels.
Added an Alternate Inlet option so that the outlet can be an
inlet. In most situations Alternate Inlet is a bad idea, but
it is needed when trying to draw a structure with more than
one channeled outlet.
Build 5.0.03 September 9, 2011
Added a "Hide Warnings" check box to the Reports Screen so
that it's easier to check pricing for unstacked
structures.
The slab weight for a DoghouseDown opening in an Integral
Base is deducted from the total base weight, and this is
illustrated graphically by the absence of the base floor line
in the opening.
Extended Manhole Tee capability to include support for
variable height risers, box riser shapes, riser offsets, and
box and elliptical tee pipe shapes.
Build 5.0.02 August 31, 2011
Bug Fixes:
Fixed debugging code that was the source of a bug.
Build 5.0.01 August 29, 2011
The Job Edit screen now allows column selection by category.
This makes it much easier to show and hide columns.
Added Reference Notes that are copied with the Reference
Structure data for display on all reports.
Design Notes are copied with the Reference Structure data,
shown when a reference structure is selected, but not shown on
reports.
Bug Fixes:
Most notes now trim trailing carriage returns.
Build 4.0.99 August 22, 2011
New jobs and structures are now named with _New as a prefix.
The underscore sorts before normal alphabetic entries, so that
new entries will not be lost in the middle of the pack.
All reports now use the same starting directory when saving
files. This means that when you save a bunch of pdf or xml
files they will default to saving in the same directory.
Elevation view pipes now show their grade if they go through
the right or left wall.
Channel and benching have been updated:
Bench slope is now specified as a proportion
(rise:run).
Channel notes is a new field that allows style or
finish notes about the channel or bench.
Channel height is now a text field with a proportion at
the beginning. You can now enter "1.5 Height" or "0.8"
Height" as a channel height.
The "General Notes" that are never printed on any reports
are now "Design Notes" that are displayed when you select a
reference structure. This should be used to remind you about
the special things that this kind of structure requires.
Bug Fixes:
The Rollout view now does a better job with round pegs
in square holes.
The pipe selection widgets now have the same pipes in
the same order.
Build 4.0.98 August 11, 2011
Customer build.
Build 4.0.97 August 5, 2011
Customer build.
Build 4.0.96 August 3, 2011
Customer build.
Build 4.0.95 August 2, 2011
Added a Default Step Spacing parameter so that 48" tall
risers can automatically switch between steps on 16" centers
and steps on 12" centers.
Added Revised and Revised Release as new release
states.
Holes through the joints of large structures now deduct the
weight of the spigot or groove joint that is removed.
Added a Priority field for each structure.
Bug Fixes:
Adjusted the Flow Tree report's horizontal indentation
to keep wide trees from falling off the edge of the
world.
Build 4.0.94 July 22, 2011
Customer build.
Build 4.0.93 July 13, 2011
The elevation view can now flip from front view to rear view
so that the A-A view arrows do not appear above the structure
in the plan view. This should make it easier to read the
drawings without flipping the page around to see how the A-A
view is oriented.
Build 4.0.92 July 11, 2011
Bug Fixes:
Fixed a bug in AutoStacking that assumed grade rings are
present when a minimum height for grade rings has been
entered - even when no grade rings are selected for
use.
Build 4.0.91 July 8, 2011
Customer build.
Build 4.0.90 July 7, 2011
Customer build.
Build 4.0.89 June 30, 2011
Customer build.
Build 4.0.88 June 21, 2011
Bug Fixes:
Fixed a bug in calculating hole volumes and
weights.
Build 4.0.87 June 7, 2011
Added a new report that prints out the Flow Tree for
reference.
Bug Fixes:
*Inconsistent Choice* will never again appear on a
report. *Inconsistent Choice* is a Status, not a
selection.
Build 4.0.86 June 3, 2011
Added support for exact height pieces on 1mm or 1/16"
increments.
Bug Fixes:
Fixed a resize bug on the Pricing screen.
Build 4.0.85 May 26, 2011
MH Pro's export files are now named with a .mhpro extension.
Files with the .mhpro extension are now associated with MH Pro
so that double clicking a .mhpro file starts up MH Pro and
opens the job for editing.
The Protractor On Screen now has an AutoRaise option that
should make it quicker to switch between MH Pro and your pdf
files.
The Protractor On Screen now has more options for ticks,
numbers, and input fields.
The quotation Cost fields can now be hidden if they are not
being used.
Build 4.0.84 May 16, 2011
MH Pro now supports directly using export files via the File
menu.
After generating a pdf file, MH Pro will now optionally view
the file or select it in Explorer.
Build 4.0.83 May 11, 2011
Added support for A4 paper size in reports.
Build 4.0.82 May 9, 2011
Customer build.
Build 4.0.81 May 9, 2011
Customer build.
Build 4.0.80 April 28, 2011
Customer build.
Build 4.0.79 April 27, 2011
Added Frame, Grate, and Pipe selectors to the Protractor On
Screen.
Build 4.0.78 April 18, 2011
Customer build.
Build 4.0.77 April 12, 2011
The Protractor On Screen now includes Distance and Grade
fields. If you don't need these inputs, the right click menu
on the centering ball of the protractor will let you turn them
off.
Dog house openings now describe their height in the opening
schedule.
Build 4.0.76 April 7, 2011
Added a new FaceHole opening graphic style that forces the
hole size of skewed box openings to be the the specified hole
size of the opening, not the projected hole size.
Make the Rollout View start to behave for boxes.
Build 4.0.75 March 28, 2011
Customer build.
Build 4.0.74 March 16, 2011
Openings in boxes can now square up their edges to the box
walls. This makes the openings look more like the manufactured
product.
Added a remote support line through port 443 that should
tunnel out through most corporate fire walls. (You still have
to initiate the session, so there is no security risk
here.)
Build 4.0.73 March 10, 2011
Customer build.
Build 4.0.72 March 8, 2011
Bug Fixes:
The Protractor On Screen no longer displays multiple
angle circles inappropriately.
Build 4.0.71 March 4, 2011
The Protractor On Screen now has an input form for a few
fields.
The Job Edit screen is now available for testing.
Build 4.0.70 February 17, 2011
Customer build.
Build 4.0.69 February 14, 2011
Customer build.
Build 4.0.68 February 8, 2011
The Add button on the Flow Tree Screen can now be set to
add new independent structures by default. This makes it
easier to use MH Pro! when all of the structures are
unconnected.
Added two new fields to the Structure Design Screen to
validate reference structures that have a minimum and/or
maximum applicable height(s). See "Height Limit Min" and
"Height Limit Max" fields on the General tab.
Changed Custom size Adjusting Rings so that their size
is dependent on the structure opening size.
Build 4.0.67 February 4, 2011
Customer build.
Build 4.0.66 January 23, 2011
Customer build.
Build 4.0.65 January 20, 2011
Customer build.
Build 4.0.64 January 12, 2011
Customer build.
Build 4.0.63 January 11, 2011
Customer build.
Build 4.0.62 January 5, 2011
The Job screen can now show the Last Edit date and Edit By
fields.
Build 4.0.61 December 17, 2010
Added a Pipe Weight field to the End Library.
Build 4.0.60 December 16, 2010
Customer build.
Build 4.0.59 December 14, 2010
MH Pro now draws blockouts around fully eccentric openings in
Downstream Defender structures.
Top access openings can now show steps below the
opening.
Bug Fixes:
Platform step calculations got screwed up a while back,
now fixed.
Build 4.0.58 December 7, 2010
The behavior of the Add button on the Flow Tree can now be
selected on the Options pull down menu. You may set it to add
just one structure at a time, or set it to show the Add
Multiple Structures dialog.
The Structure screen now allows a structure to be added
downstream through the outlet.
There is now an option to automatically position inlet
openings so the inlet invert matches the outlet
springline.
Poured in field bases can now be dimensioned for build.
Vacuum testing requirement can be documented.
Bug Fixes:
Pipe selections are now more likely to propagate to
upstream and downstream openings.
The protractor on screen now uses a more readable font
and color for the protractor angle ring.
Build 4.0.57 December 3, 2010
Customer build.
Build 4.0.56 December 2, 2010
Customer build.
Build 4.0.55 November 14, 2010
Customer build.
Build 4.0.54 November 12, 2010
Customer build.
Build 4.0.53 November 12, 2010
Customer build.
Build 4.0.52 November 11, 2010
Customer build.
Build 4.0.51 November 9, 2010
Customer build.
Build 4.0.50 November 4, 2010
Pipe ends can now be edited in place on the Current Ends tab
of the Pipe screen.
Bug Fixes:
Fixed a bug in the Pipe Fitting library data migration
process.
Fixed a misspelling on a report header.
Build 4.0.49 October 22, 2010
Customer build.
Build 4.0.48 October 21, 2010
Customer build.
Build 4.0.47 October 20, 2010
Manufacturing Date can be entered and printed just like
Delivery Date.
Bug Fixes:
Fix a bug in the BOM by Structure report that showed the
wrong Job heading data when multiple jobs were
present.
Build 4.0.46 October 13, 2010
"Inlet" is now an option for Structure Angle (step placement
in round structures). "Inlet" will try to place the steps
over the largest inlet pipe.
Grade rings can now have steps (or no step) based on the
stride down to the next step.
Bug Fixes:
Poured in Field bases are not always "By
Contractor".
Hole Size is no longer shown when the top of the pipe is
within a Poured in Field base.
Build 4.0.45 October 12, 2010
Pipes now draw more realistically in poured in field
bases.
The Flow Tree Add button now allows you to add multiple
structures.
Bug Fixes:
Added logic to the Pipe Screen to reduce errors.
Build 4.0.44 September 30, 2010
Customer build.
Build 4.0.43 September 28, 2010
Bug Fixes:
Properly draw landing slabs where the steps switch sides
across the slab.
Build 4.0.42 September 23, 2010
Customer build.
Build 4.0.41 September 21, 2010
Bug Fixes:
Fixed the Hole Name selection so that it triggers other
dependent fields like the Field Elevation to recalculate
using the new Hole Name value.
Build 4.0.40 September 15, 2010
Bug Fixes:
Some hole size callouts lost track of the skewed
holesize. They are now back on track.
Build 4.0.39 August 31, 2010
Customer build.
Build 4.0.38 August 23, 2010
Cast-In frames that are not symmetrically positioned can now
be drawn in the Plan view.
Bug Fixes:
The Job Data screen once again notices and saves changes
to Quotation terms.
Build 4.0.37 August 9, 2010
Bug Fixes:
Fixed a problem on the Structure screen that would lose
pipe selections when an earlier entry needed to be marked
"Use" in job.
A floor elevation without a specified elevation is now
an error, not a warning.
Build 4.0.36 August 6, 2010
Customer build.
Build 4.0.35 August 4, 2010
Customer build.
Build 4.0.34 July 26, 2010
Bug Fixes:
Fixed problems on the Pipe screen that popped up when
the screen was closed while saving changes.
Fixed a problem in pipe library migration.
Build 4.0.33 July 16, 2010
When a library element is selected on the Structure screen,
it is automatically marked "Use" for the job so that it shows
up at the top of the selection list.
Bug Fixes:
Job import and export now use the local file system to
read and write; copying files from remote locations to
local storage as needed. This should minimize problems
that occur when the network drops out briefly.
Fixed a bug that allowed the Structure screen to try to
create new upstream structures twice when the screen was
closed while saving data.
Build 4.0.32 July 13, 2010
Bug Fixes:
Fixed a bug in migration that required library tables
be present to show the jobs in a database.
Build 4.0.31 July 12, 2010
Bug Fixes:
Corner dimensions in boxes are now more stable when the
opening breaks into the corner on the inside face, but not
on the outside face.
Build 4.0.30 July 6, 2010
Added a new "Match Grade" Invert Elevation Option to
place pipes up so that they match the grade of the inlet and
outlet pipes. Note that the outlet elevation is at the edge
of the structure, not at the centerline.
Build 4.0.29 June 30, 2010
Customer Build.
Build 4.0.28 June 25, 2010
Bug Fixes:
Fixed a bug that used the center of pipe for dimensions
when the center of opening should have been used.
Fixed a bug in copying pipe definitions on drop
structures.
Inside drop bottom openings no longer report a
holesize. Only the pipe size and material are meaningful
to the bottom of an inside drop.
Cached library tables no longer get recreated on
startup, but only when the cache source location changes.
This fixes various data access errors that occurred when a
second person starts working on a single database.
Build 4.0.27 June 17, 2010
Bug Fixes:
Fixed knockout graphics so that the plan and elevation
views now use the same line width and color for pipes in
knockout openings.
Build 4.0.26 June 10, 2010
Added a new "Prep Elevation" opening type so that
engineered storm water structures with a prep elevation can be
easily specified.
Migration of libraries is much faster.
Build 4.0.25 June 7, 2010
ALok openings on a structure with a separate base can now
position the opening so that the Minimum Concrete Around Hole
(MCAH) is on the floor.
Tender Number is a new job level field so that reports can
meet the "All documents must display the Tender Number"
requirement.
Build 4.0.24 June 1, 2010
Customer build.
Build 4.0.23 May 28, 2010
Corrugated pipes can now select boots without corrugated
pipe adaptors, if needed.
Frames can now be displayed at the top of casting or tightly
bound to the top of precast based on a per structure choice
(Float Style on the Structure Design screen).
Build 4.0.22 May 19, 2010
Added an "Initials" column to the Status screen to mark
status messages as being reviewed and accepted.
Bug Fixes:
Fixed the Sort1 and Sort2 fields on the Reports
screen so that they are once again selectable.
Build 4.0.21 May 14, 2010
Bug Fixes:
The Drop Rotated message on drop structures was
lost in some recent changes, now restored.
Build 4.0.20 May 12, 2010
Customer build.
Build 4.0.19 May 11, 2010
Hole dimensions can now show format to feet, inches, and
fractions.
Bug Fixes:
Vent pipes, in-floor sumps, and through floor holes were
drawing inappropriately in details of the piece
above.
Build 4.0.18 May 6, 2010
Added mouse wheel support to the reports screen.
Bug Fixes:
Fixed the BOM Summary report that so that the header for
the next job does not print on final page of the this
job.
Fixed the pdf filename generator to tolerate special
characters in job names.
Build 4.0.17 May 3, 2010
Customer build.
Build 4.0.16 April 27, 2010
Customer build.
Build 4.0.15 April 23, 2010
Bug Fixes:
Fixed a bug in sort parameters for SpecialTop
parts.
Build 4.0.14 April 21, 2010
Bug Fixes:
Fixed custom parts so that they report as custom and not
stock.
Build 4.0.13 April 16, 2010
Customer build.
Build 4.0.12 April 15, 2010
Bug Fixes:
Fixed the Rollout View so that the steps display at the
correct angle.
Fixed the Structure Screen so that the Hole Name listing
doesn't slow down the application.
Build 4.0.11 April 13, 2010
Customer build.
Build 4.0.10 April 9, 2010
Customer build.
Build 4.0.9 April 8, 2010
Customer build.
Build 4.0.8 April 7, 2010
Bug Fixes:
Fixed an error in Pricing data migration that was
introduced with the recent changes to shared
libraries.
Build 4.0.7 April 6, 2010
Improved performance of shared libraries.
Build 4.0.6 March 23, 2010
Company build.
Build 4.0.5 March 17, 2010
Bug Fixes:
Fixed the documentation of poured in field bases
specified by floor elevation.
Build 4.0.4 March 15, 2010
Bug Fixes:
Fixed a problem in the Elevation View Screen where a
stray step was drawn at an elevation of 0 feet/meters for
a structure with an AutoCAD block reference.
Fixed a problem in the Pipe Screen where a check for
duplicate Hole Names resulted in an error.
Build 4.0.3 March 10, 2010
Vent pipes can now have frames placed on them.
Full size and half size platforms can now be drawn in any
structure.
Bug Fixes:
The POS now leaves a StructureAngle at Auto until you
change it.
Build 4.0.2 February 26, 2010
Customer build.
Build 4.0.1 February 16, 2010
Customer build.
Build 4.0.0 February 16, 2010
3.0 was running out of numbers, so this is 4.0.0.
Build 3.0.97 February 10, 2010
Customer build.
Build 3.0.96 February 5, 2010
Extended bases now generate a BOM line for pricing and part
numbers.
Build 3.0.95 February 3, 2010
Customer build.
Build 3.0.94 January 27, 2010
Customer build.
Build 3.0.93 January 26, 2010
Pipe and Frame library selections can now be made by typing
the name of the element into the selector. This should make
selection of library elements much faster.
Build 3.0.92 January 7, 2010
Customer build.
Build 3.0.91 December 23, 2009
Customer build.
Build 3.0.90 December 21, 2009
Customer build.
Build 3.0.89 December 17, 2009
Vent pipes and through holes can now be positioned in
intermediate slabs by specifying the hole's invert
elevation. The hole will snap to the nearest reducing
slab.
Build 3.0.88 December 10, 2009
Customer build.
Build 3.0.87 December 3, 2009
Customer build.
Build 3.0.86 November 25, 2009
Keys on wall parts and adjusting rings can now be controlled
on the Structure Design screen (your parts and reference
structures need to be set up for this, but if you need this
feature then you have been suffering more difficult work
arounds for too long).
The default font and color for notes can now be specified on
the Options pull down menu.
Build 3.0.85 November 10, 2009
Customer build.
Build 3.0.84 October 20, 2009
Customer build.
Build 3.0.83 October 19, 2009
Customer build.
Build 3.0.82 October 5, 2009
Bug Fixes:
Fixed a problem dimensioning custom size round
slabs.
Fixed a problem drawing isolated End structures.
Fixed a problem on the structure screen where un-applied
ad-hoc openings generated errors when the structure screen
refreshed.
Fixed a problem where MH Pro lost the previous screen
size and position information when previewing
reports.
Fixed a problem where pipe fittings were ignored when no
pipe was present.
Build 3.0.81 September 28, 2009
Customer build.
Build 3.0.80 September 21, 2009
Replaced ByOthers on the Stack Editor Screen with a new
Piece Source drop down list. Piece Source allows pieces to be
forced to Stock, Custom, ByOthers, or to use MH Pro's normal
rules to determine if a piece is custom.
Build 3.0.79 September 14, 2009
Structures can now have any of four release states: Edit,
Submitted, Released, and On Hold.
Auto is now an option for Structure Angle (step placement in
round structures). Auto will try to place the steps away from
the pipes. This should work correctly for most
structures.
Bug Fixes:
Weir walls are not included in the channel weight.
Build 3.0.78 September 4, 2009
The name of the top of the structure can now be set for
individual structures. You can make it say "Form Grade", "Top
of Grate", "Curb Line" or anything you like instead of "Top of
Casting".
Bug Fixes:
Invert elevations in the elevation view now always show
two digits after the decimal point for feet or three
digits for meters.
Build 3.0.77 September 2, 2009
Bug Fixes:
Fixed a Data has Changed error associated with the new
structure release function.
Build 3.0.76 August 20, 2009
Renamed the BOM report to reflect that only selected
structures contributed to the report when the entire job is
not included.
Bug Fixes:
Fixed an error on the Pipe Screen related to quickly
pressing the Add button more than once.
Build 3.0.75 August 18, 2009
Structures can now be released. A released structure will
generate a warning when any change is applied to it.
MH Pro now dimensions the angles on holes in double curb
inlets.
Bug Fixes:
MH Pro now does a better job of drawing openings that
cannot be made. This makes it easier to show a drawing to
the engineer and say, "No, an 18" RCP pipe does not fit in
a 24" catch basin."
Doghouse openings no longer draw in separate bases when
the pipe is in the center of the hole and the pipe is also
on the floor of the separate base.
Ignored openings in the floor no longer make a piece
custom.
The Protractor On Screen now does a better job of
staying on top of PDF files.
Fixes to obscure bugs on a variety of screens.
Build 3.0.74 August 3, 2009
The connector library includes updated LinkSeal definitions.
Old LinkSeal connectors should be deleted and
regenerated.
Bug Fixes:
Eliminated duplicate entries in the structure
Miscellaneous Items and Pipe Fitting data grids when
corresponding duplicates exist in the libraries.
Properly add up the Miscellaneous Items so that
unpriceable entries do not get lumped together as a single
line item.
When an exact match of base key is not required, but the
default joint types do match, then an exact match with the
riser spigot is use if available.
Platforms now draw properly in the plan view of
structures that do not have steps.
Build 3.0.73 July 29, 2009
Connectors now ignore By Others in the Pipe Library. To
remove a connector from the reports, set the Connector Type
and Model to the blank entry.
Miscellaneous Items and Pipe Fittings:
Added a new 'Pricing Description' column to the
Miscellaneous Items/Pipe Fittings for Structure tables in
order to cross reference the corresponding entry in the
Pricing Screen.
When the Description does not match the Pricing
Description, a status line is generated. This should
prevent errors that result from improper changes to these
entries.
Added a new 'In Library' column which contains 'Yes' for
an entry that has a corresponding library and 'No' for one
that's missing.
Bug Fixes:
Fixed pricing so that each Price List has the same
Description. This eliminates the potential for different
product descriptions from different price lists.
Fixed an error associated with the 'Ignore Item' Data
Source selection on the Miscellaneous Items Screen and the
Pipe Fittings Screen.
Build 3.0.72 July 22, 2009
Bug Fixes:
Fixed a problem with the POS when it was shut down while
drawing.
Arch openings and pipe now draw more consistently.
MH Pro now offers to copy all openings when pasting a
structure.
Build 3.0.71 July 17, 2009
After a new job is created, control is now transferred
directly to the Job Name on the Job Data screen. This should
help encourage filling out the title block data when the job
is created.
Added SlabOpeningDims to graphic settings. Vents and
secondary openings in top slabs can now be dimensioned.
Bug Fixes:
Fixed a bug in pipe library migration that left all
pipes with a blank shape.
Build 3.0.70 July 9, 2009
Customer build.
Build 3.0.69 July 8, 2009
Customer build.
Build 3.0.68 July 2, 2009
Customer build.
Build 3.0.67 June 29, 2009
Tweaks to weir wall graphics.
Build 3.0.66 June 25, 2009
Bug Fixes:
Fixed bug in adding an opening while the Protractor
On Screen is running.
Build 3.0.65 June 25, 2009
Weir wall / baffle wall notches are now fully supported as
an opening type. Just specify the top of the weir wall, MH
Pro will show notches on both sides of every piece down to the
floor.
The minimum concrete around hole (MCAH) can now be ignored
by the base calculations (that is, when MCAH is 6" and the
floor is 5" MH Pro can now let the hole sit on the floor
instead of 1" above the floor).
Bug Fixes:
Rebar notes are now include in the rebar callouts.
Control-P now brings up the reports screen for MH
Pro
Build 3.0.64 June 19, 2009
The Protractor On Screen (POS) is now available for use.
The POS makes it easy to measure angles in PDF files of
drawings without printing them out.
Bug Fixes:
Fixed pipe counts on various reports.
Build 3.0.63 June 16, 2009
Bug Fixes:
Fixed Part Weight on various reports.
Build 3.0.62 June 12, 2009
Bug Fixes:
Fixed issues in reading CAD blocks.
Channels now draw the same when looking at the structure
and when looking only at the channeled piece.
Build 3.0.61 June 10, 2009
Bug Fixes:
Fixed a bug in Export By Job.
Build 3.0.60 June 4, 2009
MH Pro now tries to save its data files in My
Documents\MHPro. This will make it easier for normal backup
routines to include the MH Pro database.
Bug Fixes:
Fixed pricing and weight rollups on the Status
screen.
Fixed weight rollup on the Order Summary report.
Build 3.0.59 May 27, 2009
Customer build.
Build 3.0.58 May 22, 2009
The reports screen now lets you hide all 'Not Priced' status
lines.
Build 3.0.57 May 20, 2009
Bug Fixes:
A cast-in connector can not be specified as By Others
in the Pipe Library.
Build 3.0.56 May 18, 2009
Customer build.
Build 3.0.55 May 11, 2009
Openings through the floor of intermediate slabs now
show the opening on the plan view of shop drawings.
WarnOnStructureDistance is a new company setting that
controls whether Structure Distance is a required input.
RequiredInputColor is a new company setting that controls
the color used to indicate an unspecified required input.
The rollout view now reads and uses ChainElevHoleDims to
show vertical chained dimensions for holes.
Stack Too Tall and Stack Too Short messages now show how far
the structure is out of spec. Stack Too Tall is now a warning
when the structure intrudes into the LeaveShort.
Added a new opening type Below Final Floor that allows
openings to be drawn that do not participate in the base and
lowest invert calculations.
Bug Fixes:
Fixed problems on the Current Pipes tab of the Pipe
screen that were inappropriately setting the pipe vertical
Location and Hole Shape.
Reworked ThroughFloor and SumpInFloor holes so that they
draw only in the stock slab unless precast channels are
present.
Slope Grade now calculates to zero when no Structure
Distance is specified.
Fixed bug that showed bad values for the actual sump and
actual 2nd pour thicknesses in the build height
calculations.
Fixed the display of structure notes display on the BOM
by structure report.
Fixed poured in field bases so that they properly
calculate their location when driven by a specified floor
elevation.
Build 3.0.54 April 20, 2009
Individual pipes can now be edited on the Current tab of the
Pipe Library Screen.
Bug Fixes:
Fixed dimensioning of holes in CAD Block part
shapes.
Holes below floor now means holes are allowed below the
floor even when using a separate base.
Build 3.0.53 April 15, 2009
Bug Fixes:
Fixed an error in drawing oversized holes.
Build 3.0.52 April 14, 2009
Customer build.
Build 3.0.51 April 10, 2009
Customer build.
Build 3.0.50 April 8, 2009
Customer build.
Build 3.0.49 April 7, 2009
Bug Fixes:
Fixed the dimensioning of elongated holes in bath tub
parts.
Build 3.0.48 March 25, 2009
Customer build.
Build 3.0.47 March 18, 2009
Customer build.
Build 3.0.46 March 16, 2009
Bug Fixes:
Fixed a library import issue where imported pipes should
have been identical to newly created pipes, but were
not.
Build 3.0.45 March 12, 2009
Bug Fixes:
Fixed display of metric lengths to round off to the
nearest mm.
MH Pro now formats its screens correctly when the
display is set to 120dpi.
Build 3.0.44 March 6, 2009
End inlet/outlet lengths are subtracted from all reported
pipe quantities.
Bug Fixes:
Fixed the Pipe Fittings Screen to track the upstream
structure's pipe or end opening connection.
Build 3.0.43 February 19, 2009
A new opening type of "Doghouse Inside" was added to the
Graphic Type field. Also, former Doghouse Up and Down opening
types were moved from the Hole Type field to the Graphic Type
field. The new Doghouse Inside opening sits on the floor
instead of extending below it.
Build 3.0.42 February 9, 2009
Modified the Flange Ext. Radius on the Structure Design
Screen to allow a second base extension dimension. The second
dimension only affects box structures
Build 3.0.41 February 5, 2009
Added capability to set up Miscellaneous Items and
Pipe Fittings Libraries for remote access.
Build 3.0.40 January 20, 2009
Customer build.
Build 3.0.39 January 14, 2009
Customer build.
Build 3.0.38 January 7, 2009
Pipe tails are now drawn in the Elevation View.
Build 3.0.37 December 31, 2008
MH Pro now supports positioning openings for Pipe-On-Floor
in addition to the current Invert-On-Floor and Hole-On-Floor
conditions.
Pipe outlines can now be added to the elevation view.
The Stack Build Height subreport on Submittals can now
display in inches, decimal feet, or both.
Pipe grade can be shown on the opening schedule.
The structure overall dimension on the elevation view can
now be set to Invert-to-TopOfCasting instead of
PrepGrade-to-TopOfCasting.
The lowest flow line can be called out in the elevation
view.
Custom size risers use the bottom size for their top size.
No more tapered risers.
Build 3.0.36 December 4, 2008
Bug Fixes:
Fixed the popup menu in the Notes screen.
Fixed the plan view center offset placement of top
openings.
Build 3.0.35 December 17, 2008
Openings are sorted by angle starting from outlet
opening.
Added capability to generate dynamic USF hatch
graphics.
Build 3.0.34 December 10, 2008
When closing a screen with unsaved changes, the
confirmation dialog now includes an option to keep the screen
open.
The Select Reference form is now resizable so that long
reference job and structure names can be easily read.
Build 3.0.33 December 4, 2008
Bug Fixes:
Fixed a bug in calculation of the weight of pieces with
cast-in frames.
Build 3.0.32 December 3, 2008
Bug Fixes:
Fixed a problem with drawing an opening in a reduced
structure where the opening is in a piece above the
reduction.
Fixed a problem with displaying steps in stacked
structure where the base has a top elevation below 0.
Build 3.0.31 December 2, 2008
The Contractor list on the Job Data screen is now one of
the shared library tables.
Changed to a more explicit method of selecting reference
structures. This also sets the ground work for some other
changes, but they haven't happened yet.
Bug Fixes:
Slope Grade calculations now ignore pipes to the
downsteam root.
Step Count should always be a positive number and should
not overflow.
Build 3.0.30 November 17, 2008
The notes screen now has some font controls so that you can
note small things in small fonts and scream big things in big,
bold, glaring red fonts.
Bug Fixes:
When the opening schedule says to "see drawing" for hole
dimensions, the drawing needs to dimension the height of
all holes including corner holes.
Properly track StructureName and JobName in the
Bill-of-Material Table of Contents so that PDF-EA will
generate one PDF file for each item in the report.
A-Lok and Z-Lok slope checks can now use company
specific limits, rather than Springfield Missouri
limits.
Build 3.0.29 November 11, 2008
The user name for history actions can now be set
independently from the Windows login account name.
Vertical Notch openings can extend into the floor.
Stepped hinged grates are now partially supported.
Build 3.0.28 October 29, 2008
Customer build.
Build 3.0.27 October 27, 2008
Pipe grade is now a first class input.
Build 3.0.26 October 24, 2008
Customer build.
Build 3.0.25 October 22, 2008
Customer build.
Build 3.0.24 October 16, 2008
Customer build.
Build 3.0.23 October 15, 2008
Customer build.
Build 3.0.22 October 14, 2008
MHPro now uses the Windows message font and caption font
on some screens.
Build 3.0.21 October 2, 2008
Customer build.
Build 3.0.20 October 1, 2008
Bug Fixes:
Still trying to trap that error in the Job screen.
Build 3.0.19 September 26, 2008
Bug Fixes:
Trap an error in the Job screen that can not possibly
occur, but does.
Do a better job of placing error openings in the wall
when they are in the wall.
Build 3.0.18 September 22, 2008
Bug Fixes:
Changed the calculation for elongated holes so that a
hole must be elongated by more than one inch and more than
half the annular space between the hole and the pipe.
This makes the display of elongated holes more
forgiving.
Build 3.0.17 September 17, 2008
Customer build.
Build 3.0.16 September 16, 2008
Customer build.
Build 3.0.15 September 15, 2008
Iowa RA tops now show height to Form Grade and height above
form grade.
Cone Grate graphics can now be drawn for any size.
Bug Fixes:
Properly display the base extension dimension when using
a 60" pan (72" OD) to build a 48" extended base.
Build 3.0.14 September 9, 2008
Bug Fixes:
Fixed the structure "Copy" function to truncate
the Structure Name to 50 characters.
Build 3.0.13 September 4, 2008
Company Build.
Build 3.0.12 September 4, 2008
Added "Current Frame" and "Current Grate" tabs to the
Fab. Steel & Cast Iron screen to provide a quick method for
modifying the current casting used in the structure. This new
capability reduces the amount of library entries that would
normally be required to model a family of castings with
similar data. The modified casting(s) do not create a new
entry in the library. Instead, they only change the entry for
the current structure.
Build 3.0.11 September 2, 2008
Bug Fixes:
Fixed Frame and Grate logic so that slope top structures
draw correctly.
Build 3.0.10 August 28, 2008
Company Build.
Build 3.0.9 August 22, 2008
Most reports now have default filenames that match the scope
of the report and the name of the report.
Bug Fixes:
Miscellaneous items that are copied in with the
reference structure are now deleted when the reference
structure is changed.
Build 3.0.8 August 6, 2008
The Status screen History tab now tracks when reports are
printed and when PDF files are generated.
Bug Fixes:
Fixed a error that occurs when a precast piece is over
32767 mm or 32767 inches tall.
Build 3.0.7 August 5, 2008
PDF files can be directly generated from the Reports
screen.
The Status screen now includes a History tab so you can see
when you printed that last report, or most recently re-stacked
the structure.
Bug Fixes:
Fixed an annoying bookmark error on the Job screen.
Protect system connectors from being deleted.
Build 3.0.6 July 29, 2008
Company Build.
Build 3.0.5 July 25, 2008
The Pricing screen can now show only the items used to price
the current structure.
Build 3.0.4 July 24, 2008
Company Build.
Build 3.0.3 July 21, 2008
Most graphical and BOM reports now support selectable
DisplayUnits to automatically show outputs in Metric or
English. (The opening schedule, unfortunately, is still only
in native units.)
Warn when a hole is too big for the structure according to
arbitrary limit for each SectionSize. Note that you must
supply the arbitrary holesize limit for each SectionSize for
this check to run.
Added AboveLargePipes as a new reduction style.
AboveLargePipes works from the same holesize limits as the
hole too big warning above, so you must provide the arbitrary
holesize limits for each chimney size for this reduction style
to run.
New options for pricing make it easier to mark each piece
with an appropriate pricing schema WallOnly, SlabOnly, and
SlabEaAndWall.
Bug Fixes:
Reports no longer show multiple copies of the PDF export
button.
Build 3.0.2 July 14, 2008
MH Pro can now draw Iowa RA style tops in modified
sizes.
Build 3.0.1 July 7, 2008
Migration import now works back to build 1.0.0 of MH Pro.
This makes migration from older versions much faster.
Build 3.0.0 July 2, 2008
Celebrate MH Pro! version 3 with new screen icons organized
by color. This should make it easier to find the screen you
are looking for.
Bug Fixes:
The Use? column is reliably visible on the Pipe and
Fabricated Steel screens without scrolling.
A Custom size opening on a structure will make the top
piece of the structure match the Custom size on the
Structure Design screen. An Any size opening on a
structure will make the top piece of the structure match
the size on the frame of the structure. (I hope that's
clear. (Yes it is. Clear as mud.))
Build 2.1.59 July 1, 2008
Bug Fixes:
Steps can now be placed in bases without regard for the
benching even when the benching will cover the steps.
Fixed an error in copying connectors.
Build 2.1.58 June 27, 2008
Company Build.
Build 2.1.57 June 24, 2008
PouredInFieldFrom reference now has more options including
Poured from Springline.
The Structure screen has been re-worked so that Ad-Hoc
openings can be easily converted to add a structure upstream
through the opening.
Openings can now be retained when an upstream structure is
moved or deleted.
Shop reports can now include the entire structure in the
elevation view with the specific piece to be made
highlighted.
The Production Index report can now create a Fabricated
Steel summary report.
Text highlighting behavior can now be turned on and off on
the Option pull down menu.
Bug Fixes:
Pieces that are made by the company but not at the
currently selected plant are marked *** on the Structure
Design and Stack Editor screens.
The CenterOffset and CenterOffset2 selectors on the
Stack Editor now read the actual opening and structure
sizes to determine the tangent offset detents.
Fixed volume calculations for slabs with an internal
landing shelf.
Build 2.1.56 June 4, 2008
Bug Fixes:
The print button on reports is now only available after
the report has finished generating. This avoids an
condition where the report locked up when the print button
was pressed before the report finished generating.
Drip Stones now properly calculate weight.
Build 2.1.55 June 2, 2008
Added a Holes Below Floor override setting to the Structure
Design Screen. This allows each structure to specify whether
holes are allowed to extend below the floor slab of the
structure. Hole Below Floor normally uses the value set for
each precast base. This new setting allows Holes Below Floor
to be changed on the fly when needed.
The stack editor now treats the delete key as a Delete, and
a double click as an Add Above.
Bug Fixes:
The two-up landscape shop report now forms a larger
gutter between the pieces on the right and left sides of
each sheet.
Pipe ends now include more detail in the default Pricing
and BOM entries.
Build 2.1.54 May 28, 2008
Company Build.
Build 2.1.53 May 28, 2008
Bug Fixes:
Draw holes through floors in base-in-riser slabs.
Elevation views had been defaulting to rear view
instead of front view.
Build 2.1.52 May 27, 2008
Bug Fixes:
Fixed custom piece logic to include a separate base with
a hole through the floor.
Build 2.1.51 May 20, 2008
Bug Fixes:
The Butterfly View now eliminates more duplicate
elevation graphic data.
Resetting the columns on the Job screen now resets the
column order as well as column selection and width.
Fixed an intermittent "object not set" error on the Flow
Tree.
Fixed an intermittent "no current record" error in the
Elevation View.
Build 2.1.50 May 12, 2008
A new PriceList field allows jobs to use an appropriate
price list.
A new TargetTextHeight graphic setting allows a bit more
control of font size in the elevation view.
Connectors can now be marked as Stock so that you can more
easily match pipes with your stock connectors.
Bug Fixes:
Fixed a division by zero error in the wall and slab
pricing routines.
Database contention errors when using a shared library
now back off and re-try before giving up. This should
reduce hard errors.
Build 2.1.49 May 7, 2008
Bug Fixes:
When no jobs are being migrated, do not migrate.
Build 2.1.48 May 2, 2008
New Opening Graphic of Knockout draws more accurate and
aesthetically pleasing knockouts.
New Wall&Slab pricing option simplifies maintaining
pricing data for many precasters.
Bug Fixes:
Graphics screens keep track of panning information
better when the window is minimized or maximized.
BOM and Quote Excel reports now use an appropriate sort
when no explicit sorting is required.
Build 2.1.47 April 28, 2008
Customer build.
Build 2.1.46 April 25, 2008
Added Structure Number to 'Sort 1' and 'Sort 2' lists in
the Reports screen.
Bug Fixes:
Increased 'Notes About Selected Piece' field length
in the Stack Editor screen.
Build 2.1.45 April 17, 2008
Replaced the 'All Reports' tab heading with 'General' in
the Notes screen. This change provides for an optional note
that may be included/excluded from various reports by FBE.
Also, moved 'Not Reported' notes to the 'Other' tab and
added a new Shipping notes tab. Shipping notes only appear
in the BOM reports at this time.
Added the new Shipping notes to the BOM reports.
Bug Fixes:
Cleaned up migration to eliminate dependency on external
files (ArchiveSchema.mdb and EmptyArchive.mdb.)
Build 2.1.44 April 15, 2008
Vent pipes can be added to the final reducer of a structure.
The graphics can be just a hole, or a hole with a U bend
pipe.
Pump station bases can now draw chamfered corners for a wet
well configuration.
Bug Fixes:
Reduction limits now work correctly when slabs use
SlabReference_Top.
Fixed a problem tracking structure quantity into the
precast pieces for BOM quantities.
Build 2.1.43 April 10, 2008
Customer build.
Build 2.1.42 April 8, 2008
Bug Fixes:
Fixed 'Above Springline Match' so that it matches the
center of an inlet pipe with the the springline of the
Outlet pipe.
Build 2.1.41 March 31, 2008
Bug Fixes:
Fixed the Product ID filter in the Pricing screen.
Build 2.1.40 March 27, 2008
Opening inverts can now be defined by their position above
the outlet springline.
Bases can now enforce a minimum distance above the floor to
the lowest opening.
Bug Fixes:
Fixed an error in drawing extended bases.
Build 2.1.39 March 21, 2008
Bug Fixes:
Cast in place bases now properly position the bottom
riser below the inlet pipes when a Floor Elevation is not
specified.
The butterfly view now draws only one opening for each
oversized hole.
Build 2.1.38 March 19, 2008
Customer build.
Build 2.1.37 March 19, 2008
Customer build.
Build 2.1.36 March 18, 2008
Added the capability to setup remote libraries. Please
contact FBE support to learn more about this feature.
Build 2.1.35 March 17, 2008
BOM extracts can now be created in Excel .xls format or in
dBase .dbf format.
Each structure now has a unique Structure Number associated
with it. This makes it easier to create descriptive bar
codes.
The connector library is now included in the remote library
tables setup.
The MiscData table of company specific data is now included
in the remote library tables setup.
Bug Fixes:
Reduced the number of duplicate Descriptions in the
Pricing table.
A new channel drawing algorithm should reduce the number
of spurious line in complex channels.
Treatment Match now works better when dealing with
non-exact matches of Keyed and Flat joints.
OPSD requires platforms every 5 meters from invert,
not from top of bench.
Build 2.1.34 February 28, 2008
Bug Fixes:
Fixed a bug in data import that removed channels from
all sanitary structures during migration.
Build 2.1.33 February 27, 2008
The Match Base Key and Match Reducer Key fields now include
Prefer Flat and Prefer Keyed options to help select the
appropriate joint mating.
The new Help file is now included in the build.
Poured-In-Field bases are now marked "By Others" so they do
not appear on BOM reports.
Bathtub shaped structures are now supported in the Plan
View.
Migration import should now be much faster. You still have
to wait for the job to load and update, but the migration is
faster.
Added Min Adj Rings and Max Adj Rings goodness criteria for
AutoStacking.
Hamilton Kent bought the IPS connector line so all of the
IPS connectors are now renamed HK.
Bug Fixes:
Fixed a bug in displaying available sections in the Mid
1 Reducer section.
Status messages for Invert Elevation and Angle are now
properly ignored for pipe end structures.
Build 2.1.32 February 20, 2008
Bug Fixes:
Added a check for stranded data in the Flow Tree Screen
when adding a new structure.
Build 2.1.31 February 19, 2008
Added a new Excel Pipe Summary Report.
Build 2.1.30 February 18, 2008
Hole distances along the inside and outside of the structure
can now be formatted to show fractional inches.
Arrays of weep holes can be added to parts.
Bug Fixes:
Fixed a bug where BOM lines were missing when parts were
similar but different.
Fixed a resizing bug in FBESQL that could keep FBESQL
from starting up.
Build 2.1.29 February 12, 2008
Customer build.
Build 2.1.28 February 4, 2008
Bug Fixes:
Pipe ends on zero diameter pipes now draw a zero size
pipe end.
Build 2.1.27 February 1, 2008
Bug Fixes:
A Floor Elevation opening can now drive the location of
a Poured-In-Field base (instead of specifying the top of
the PIF base relative to the outlet invert).
Chained wall dims now appropriately report 4.5 inch
walls on 42 inch structures.
Eliminated a spurious Corner dimension that appeared
when a throat opening hit the corner of the
structure.
Changed the way that parallel dimensions draw in round
structures so that parallel holes at the same angle will
draw stepped parallel dimensions. This means that two
sets of parallel holes at the same angle now draw
properly.
Build 2.1.26 January 24, 2008
Added a new 'Tight Merge' option to the Plan Collision
Option field in the Plan View Screen. This new option allows
the opening ID's on the plan view to pack very tightly before
merging into a single callout. This can make Swiss cheese
structures more readable, but it can also result in IDs that
draw on top of each other, so use it with care.
Bug Fixes:
Reduced MH Pro!'s use of "System Resources" to avoid
generating a "System resource exceeded" error when
updating large jobs (above 190 structures).
Fixed an 'Operation Canceled' error on the Contractor
tab of the Job Data Screen.
Build 2.1.25 January 21, 2008
Added Supplier to the Structure Design Screen. Now
incidental items can be priced differently depending on the
Supplier.
Bug Fixes:
Fixed the "From" column in the Pipe Detail report so
that it displays data.
Fixed an error related to generating Pipe Fitting
pricing when migrating Pipe Fittings.
Fixed a "Bad OpeningKey" error that occurred when
associating the top and bottom openings of a drop
set.
Build 2.1.24 January 15, 2008
Bug Fixes:
Fixed an error in migrating trim pipe information where
the migrated database was exported before it was later
imported.
Build 2.1.23 January 14, 2008
Cone weights are now automatically calculated. If you have
given us actual cone weights, these will continue to be used.
The calculated weights are often on the conservative side
(heavy), so actual weights are still preferred over the
calculated weights.
Build 2.1.22 January 10, 2008
Bug Fixes:
Fixed an error in drawing holes in floors.
Build 2.1.21 January 9, 2008
Pipe Ends now appear graphically on the site plan.
MonoTops can now dimension openings to the bottom of the
slab.
Bug Fixes:
Connectors in Cast-In-Place bases are now displayed as
"In CIP Base" in the opening schedule.
Build 2.1.20 December 17, 2007
Bug Fixes:
Fixed bookmark problems associated with selection of
Reference Structures for use in Job.
Build 2.1.19 December 13, 2007
Added a new "Trim Pipe" field to the General Tab of the
Structure Design Screen. This new field controls whether the
Structure's pipe is trimmed to the wall of the structure.
When Trim Pipe is set to "Yes", the pipe is trimmed at one or
both ends provided the pipe end is attached to a round
structure.
Added logic to dimension parallel holes in a box with
parallel centerline dimensions when the holes are defined as
parallel, (not Face) and are perpendicular to the box
face.
Bug Fixes:
Fixed angular dimension so that its in the correct
position when Plan Angle Option in the Plan View is
set to show distance from hour marks.
Build 2.1.18 December 7, 2007
Bug Fixes:
Fixed a duplicate entries in BOM problem when importing
data from recent builds.
Part Weight is now formatted properly on the Order
Summary reports.
Build 2.1.17 December 7, 2007
Modified 'Specify Qty' for pipes and ends in the Pipe
Fittings Screen to adjust the downstream quantity for the
unchecked state.
Added a new graphic option to generate chained wall and
structure size dimensions in addition to the overall size
dimension that currently generate only for extended
bases.
Bug Fixes:
Fixed copy logic in the Pipe, Pipe Fittings, and
Miscellaneous Items Screens.
Fixed a bug in synchronizing data for openings that
would leave the graphic views showing old data until the
opening was kicked with a large change. It now behaves
properly.
The data migration screen now does a better job of
determining what data the archive database can
receive. This fixes an error where the archive process
would try to copy data to tables that did not exist.
Adjusted formatting of Quantity on BOM reports for
better vertical alignment.
Excel was not automatically starting for some users
when generating Excel XML reports. Reworked the routines
to more reliably find Excel.
Link-Seal connectors now calculate the recommended hole
size.
Ad Hoc openings now ignore the pipe fittings associated
with the structure when calculating the pipe length for
the opening. This fixes a negative pipe quantity seen in
the BOM for the structure.
Build 2.1.16 November 6, 2007
Bug Fixes:
No errors generate when importing libraries from
databases without library tables.
Build 2.1.15 October 30, 2007
Added a feature for trimming an opening's pipe distance to
the structure's inside wall. The trimmed pipe provides more
accurate pipe quantities in BOM and pipe reports. Also, the
Site Plan displays the trimmed pipe to a structure's inside
wall instead of the center. Please contact FBE to activate
this feature.
Build 2.1.14 October 23, 2007
Changed dimensioning for elongated openings in boxes in
the Plan View to display both width and height as
xxxW/xxxH where "xxx" is the width/height dimension.
However, elongated openings such as dog house openings
DO NOT display the full dog house height dimension to the
dog house edge of the piece.
Build 2.1.13 October 17, 2007
Added a new "Shop" column to the BOM table in the Status
screen. The new Shop column displays an "X" for precast
pieces that will generate a shop drawing.
Added a new "Specify Qtys" check box to the Pipe Fittings
screen. When Specify Qtys is checked, the user can control
pipe quantities for the downstream ("From" and/or "To")
pipes. Otherwise, the system automatically calculates just
the downstream pipe quantity (From Qty) as the difference
between the structure distance and the pipe fitting
distance.
Build 2.1.11 to 2.1.12 September 21, 2007
Customer build.
Build 2.1.10 October 5, 2007
Bug Fixes:
When the default precision hole type is Cored, use
Cored for precision holes.
Fixed a fatal bug in Structure Design's copy data.
Build 2.1.9 September 21, 2007
Customer build.
Build 2.1.8 September 21, 2007
Bug Fixes:
Since the plan view started showing the base extension,
it has been calculating the outside distance between holes
using the base extension rather than the wall size.
Build 2.1.7 September 14, 2007
Both ProductID and PartNumber are now shown on the BOM tab
of the Status screen.
Bug Fixes:
Fixed a situation where some older Migrated structures
had been stacking with no adjusting rings when at least
one adjusting ring should have been required.
Build 2.1.6 September 13, 2007
Added ReductionStyle MaxChimney. This allows a maximum
height of chimney pieces above a size reduction.
Bug Fixes:
Fixed some stability issues on the Structure
Screen.
Build 2.1.5 September 7, 2007
When a base is poured around a riser on blocks, MH Pro
can now show and dimension the block.
Link-Seal connectors are now part of the basic connector
library.
Connectors can now have a ConnectorLength. This means that
Link-Seal connectors with sleeves can be modeled
properly.
Bug Fixes:
The Sump Height is now being copied like the rest of the
structure's design data when new structures are added.
Build 2.1.4 August 27, 2007
The Plan View now shows the outline of the base extension
when a structure has an extended base.
Bug Fixes:
Dates are now coerced into the Windows date format so
that they will be in an appropriate format when saved to
the database. This fixes a bug that occurred when text
format dates were saved to the database.
Build 2.1.3 August 21, 2007
The Status screen has a new "All Notes" tab which
summarizes all the notes for the current structure in one
place.
Fixed the Pipe Length fields in the Pipe Fittings for
Structure section of the Pipe Fittings screen to replace the
currently selected library with a new library when the Pipe
Length is changed. The new library is exactly like the old
library except for the new pipe length.
Added a "Sump is not valid. Please enter a valid sump"
status message to warn when the sump copied from the reference
structure is negative. This allows the user to specify a
negative sump to signal that a sump value must be entered.
Build 2.1.2 August 13, 2007
There is now a Floating screen menu option. The Options menu
now includes the choice of using large or small icons on the
Toolbar.
Reworked platform naming and naming of parts with platforms
so that pieces with platforms will be noted on the Order
Summary report.
Build 2.1.1 August 10, 2007
Bug Fixes:
Fixed a datatype error when saving data for new
openings.
Build 2.1.0 August 8, 2007
In acknowledgment of a paper version of the MH Pro! User
Manual, this is version 2.1.0.
The Structure screen now shows the placement modifiers in
their own selection list. This should make it easier to use
the advanced hole placement features - No more hidden
interface.
Bug Fixes:
Build Tolerance High and Build Tolerance Low now allow
only positive lengths to be entered.
Build 2.0.49 August 6, 2007
Job export and import are now available on the Migration
screen. Import is only available for jobs that were exported
from the current version. Import is much faster than the
Migration copy routines, so use it when it is available.
A new screen for managing pipe fittings is available for
testing.
On the Structure Design screen, the tabs of the Middle
section now include a "+" when the tab is set to participate
in AutoStacking.
The Structure Design screen is now noticeably faster.
Tops now have their own Minimum and Maximum Height on the
Structure Design Screen.
Bug Fixes:
The Butterfly view now shows Elevation dimensions on one
of the elevation views.
Fixed an overflow error in the graphics when zooming in
to the maximum zoom.
The selected job in the job screen now follows user
selection in a more reasonable way.
Added a "Stacked Structs" column to the Job datagrid so
that you can see how many structures in each job are
stacked.
Build 2.0.48 July 23, 2007
Internal build for testing.
Build 2.0.46 to 2.0.47 July 18, 2007
Replaced the Archive Screen with a new Migration Screen (see
the icon with the letter M on it).
Added a progress bar for deleting jobs.
Removed the step graphic from the Plan View when a precast
piece does not have steps.
Build 2.0.45 July 3, 2007
Customer build.
Build 2.0.44 June 28, 2007
The Site Plan now measures in Feet for English databases, mm
for metric databases. The Site Plan screen was also
reformatted to look more like the other graphic screens.
The Structure Design screen now takes up less vertical
space. This lets it fit better on widescreen laptops.
The Archive screen has also been reformatted to take up less
space and show more meaningful data about Jobs.
Bug Fixes:
AutoStacking had been having problems building minimum
height structures. We re-wrote it to fix this problem. As
a side effect, the re-write caused stacking to run
slightly faster.
Fixed a bug where selecting a printer in print setup
would be ignored. The selection is now tracked.
Build 2.0.43 June 22, 2007
Internal build for testing.
Build 2.0.42 June 21, 2007
The plan view now uses the size of the bottom most wall to
draw openings. This allows structures with oversize bases to
draw openings on the appropriate diameter wall.
Build 2.0.39 to 2.0.41 June 20, 2007
Customer builds.
Build 2.0.38 June 19, 2007
Added a new 'Hole Shape' field to the Pipe Library
Screen so that round pegs can be put into square holes and
square pegs can be jammed into round holes :)
Contech Stormfilters can now be drawn for 48", 72"
and 96" structures. Miscellaneous Items can add filter
media to the BOM for Stormfilter structures.
Miscellaneous Items can now have Weight. This is summed into
the structure's total weight.
Bug Fixes:
Copying a structure on the structure screen once again
copies the frame and grate.
Arch openings now calculate their volume and are
deducted from the weight of the piece.
Structure Quantity must now be 1 or greater. Use
Ignore Structure on the Structure Screen to skip the
structure in most reports.
Build 2.0.37 June 12, 2007
Added additional controls for filtering and searching
for rows in the Pricing screen. Each column has a new control
located directly above the heading which provides a drop down
list for selecting an entry to filter for the matching row(s).
In addition to the drop down list, a key string may be entered
in the control to search for row(s) that contain the matching
string. At this time, only the Category (filter only, entry
not allowed), Product ID, and Description controls are
functional.
Bug Fixes:
Fixed Sump Height on the Structure screen so that
applying changes does not reset it to the Reference
Structure's value.
Fixed step angular placement for round structures in the
Rollout View screen.
Build 2.0.36 June 7, 2007
Bug Fixes:
Naming routines now use company height conventions when
searching for heights in naming strings.
Show Job notes on all BOM reports.
Build 2.0.35 June 6, 2007
Bug Fixes:
Miscellaneous items now include the structure quantity
in the Quote and BOM quantity calculations.
The final reducers available in the structure design
screen now include reductions from all of the sizes
selected for intermediate reductions.
Warnings now appear above missing prices on the status
screen. This should make it easier to scan past pricing
messages when trying to build the structure.
Build 2.0.34 June 4, 2007
Bug Fixes:
To be an intrusion from the piece below, a hole must
actually have some portion below the bottom of the current
piece, not just below the inside floor of the base.
Fixed.
The end points of the angle dimensions are now
positioned to the center of the piece, not to the center
of the structure. Fixes a bug when pipes are in a
chimney.
Build 2.0.33 June 1, 2007
Bug Fixes:
Apply now saves changes to the contractor list even when
no job is loaded.
The "No Grate/Cover is specified" warning does show up
when no Grates/Covers are present in the Grate
library.
Fixed a bug where Grate selections were not being
propagated when new upstream structures and a change to
the grate occurred at the same time.
Build 2.0.32 May 30, 2007
Slope Tops can now use the low side as the setup
height.
Bug Fixes:
Obsolete pieces and pieces from other plants now always
show a * or *** prefix on the Structure Design
screen.
Fixed an object not found error when calculating the
invert elevation of a root opening.
Build 2.0.31 May 22, 2007
Auto Stacking now has Variance and AbsVariance to allow
over-height structures to minimize the total height.
Structures that refer to obsolete pieces will now re-stack
in the Auto Stacking screen. Obsolete pieces in a stack now
generate an error status.
The elevation view in shop drawings now dimensions openings
across the bottom joint to the top of the opening.
Platforms can snap to the standard location in each
piece.
Bug Fixes:
Removed duplicated entries when adding new library
items.
Build 2.0.30 May 16, 2007
Added a new 'Sump Height' control to the Structure
screen.
Slope tops can be added using the Fabricated Steel screen
using the Height, Graphic Height, Top Treatment (Cast In), and
Graphic Type (Slope Top Long and Slope Top Short) fields. The
slope of the slope top is the Graphic Height whereas the
height of the slope to frame is the contribution to the build
height which is normally negative.
Bug Fixes:
Fixed the Rollout View screen so that it displays steps.
Box structure steps may be unstable depending on the
structure configuration.
Build 2.0.29 May 9, 2007
Bug Fixes:
Fixed rounding so that various graphical views report
consistent results.
Build 2.0.28 May 8, 2007
Bug Fixes:
Cast-In and Notch-For frames now properly deal with
keyed tops.
Pipe now has an unselected option for uniformity.
Build 2.0.27 May 3, 2007
Bug Fixes:
The Job Data screen no longer throws out all pending
changes when trying to save with a non-valid entry.
Build 2.0.26 May 2, 2007
Trial project for a new customer.
Build 2.0.25 April 25, 2007
Added extended base dimension to elevation view. Reworked
Grade and Top dims to position themselves better when other
dimensions and notes are present. Let grates read the
GraphicHeight for a frame or grate.
Added MiscItems and Additional item to the BOM reports.
Bug Fixes:
Explicitly specify data grid column visibility for
Miscellaneous Items in the structure.
Pallet openings are not pipe collisions. Opening in
Casting is different than opening above casting.
Grates read the GraphicHeight for a frame or grate.
Build 2.0.24 April 23, 2007
Customer build.
Build 2.0.23 April 16, 2007
Bug Fixes:
Fixed an error that occurred when the database had the
same piece selected twice in a stacking zone.
Fixed an archive bug that made it hard to resurrect
migrated pipes.
Opening collisions with a Base In Riser joint are now
warnings not errors.
Finally fixed the elevation view graphics so that it
does not draw a silhouette line across the inside bottom
of bases.
Build 2.0.22 April 11, 2007
Customer build.
Build 2.0.21 April 9, 2007
Bug Fixes:
Fixed the status line collision to generate a warning
instead of an error when a Poured in Riser Base is too
close to an opening.
Build 2.0.20 April 6, 2007
Customer build.
Build 2.0.19 April 6, 2007
Changing the PricingKey of a Base Poured In Field now
changes the Elevation view description of the base. This
means that a gravel bed below the riser can now say "Gravel
bed".
Bug Fixes:
Automatic Stacking now recalculates the location of each
Below Adjustment opening based on the candidate
stack. This allows the collision calculations to properly
count the collisions for each candidate stack.
MH Pro! EZ can now generate reports when installed on a
Windows Vista machine. Our testing for Vista is not yet
complete, but this gets things started.
Miscellaneous Items are now included in export
databases.
Openings that are in both the first riser and in a
Base Poured In Field now draw appropriately in the riser
if the top of the pipe is in the riser. (If the top of
pipe is below the riser, we assume that no alteration of
the riser is needed.)
Build 2.0.18 March 30, 2007
Added a new Miscellaneous Items screen to allow miscellaneous
items to be added to structures for the Order Summary and BOM
Excel reports.
Platforms can now have notes to describe custom features.
Bug Fixes:
Minimum Height and Maximum Height now actually work
when set for the base section of the StructureDesign.
AutoStacking no longer throws away stacks that differ
by the thickness of a separate slab base.
Build 2.0.17 March 13, 2007
Customer build.
Build 2.0.16 March 8, 2007
InsideDropStyle and OutsideDropStyle are now per structure.
DropStyle may now be specified on the StructureDesign
screen.
Bug Fixes:
Fix a bug that occurs when a Zero diameter feature is
located exactly in a corner of a box.
Build 2.0.15 March 5, 2007
FBE Remote Support now has 10 ports available for
connections between customers and FBE staff.
The Elevation view now tracks the A-A view orientation
based on the GraphicSettings. This means that the view
marked A-A is the elevation view as seen on the report.
The Job screen can now show the Location1 and Location2
fields from the Job table.
Bug Fixes:
The Export Database report used to lose openings when
exporting single or selected structures. Openings that
ran to upstream structures would be lost. Now they are
converted to AdHoc openings.
The elevation view no longer dimensions the structure
TopOfCasting on shop drawing of pieces with cast-in
frames.
BOM now formats quantities to, at most, two decimal
places. This fixes unreadable data when showing
fractional quantities.
Build 2.0.14 February 27, 2007
Bug Fixes:
Special characters in export databases names used to
cause the export to fail.
Build 2.0.13 February 14, 2007
Bug Fixes:
Fixed a bug introduced in version 2.0.10 where small
changes in the structure were not saved to the
database.
Fixed a bug where a Min Height specified for the
adjusting ring in the Top tab of the Structure Design
screen was ignored such that structures would AutoStack
without adjusting rings.
Build 2.0.12 February 8, 2007
Major overhaul of the Structure Design screen to add two new
reducer zones.
Build 2.0.11 February 8, 2007
Bug fix release.
Build 2.0.10 February 7, 2007
Customer build.
Build 2.0.9 February 6, 2007
The Pricing Key of a precast piece can now be edited on the
Stack Editor. This allows the creation of custom, priceable
pieces that show the edited Pricing Key in the Bill of
Materials and part description.
OutletInRiser is a new goodness criteria. In structures with
sumps, this will place the outlet hole at the bottom of the
first riser where it is easy to position in the form.
The button toolbar can now be forced to stay at the top or
on the left side of the screen.
Bug Fixes:
AutoStacking now properly treats a Zero Or One setting
as Zero even when the zone is limited with a Minimum
Height and a Maximum height.
Sumps and holes in floors can be box shaped.
Build 2.0.8 January 30, 2007
Customer fix build.
Build 2.0.7 January 25, 2007
Openings in the floor can now be positioned off-center.
Use the new D modifier to the Opening Angle to specify the
off-center distance.
Openings can now use the Vertical Notch graphic style for
structures that are notched to support installation of weir
walls.
Openings in the floor can now be marked as a Sump in
Floor.
PSX Cast-a-Seal boots are now included in the Connector
Library.
Manhole Tee bases can now be stacked for 180 degree
straight through configurations.
Bug Fixes:
Resolved a long standing uncommitted change issue
where the Paste command on the Structure Design screen
would confuse the Reference Structure selection on the
Structure screen. When the uncommitted change on the
Structure screen saved, it over wrote the data from
the Structure Design screen's Paste command.
Build 2.0.6 January 19, 2007
Customer build.
Build 2.0.5 January 17, 2007
Customer build.
Build 2.0.4 January 12, 2007
Customer build.
Build 2.0.3 January 10, 2007
Customer build.
Build 2.0.2 January 9, 2007
The MH Pro! EZ help file has been updated with current
information.
There are now three possible pricing methods for quoting a
structure one of which (the first) is based on BOM data. A
Quote may contain structures which are priced using one, some,
or all of:
The current method of rolling up a price from individual
piece and component prices
A price as fixed plus price per unit height
A specified price for each structure
A new Quote report uses these new pricing methods.
The status screen display of BOM and Quote date has been
reformatted to show important data in the first columns.
The status screen now uses a light blue color to highlight
pricing errors. This should make it easier to distinguish
between ignorable pricing errors and important design
errors.
A new paper describes MH Pro! EZ's calculation and rounding
process in great detail. We have used this to tweak the
rounding routines to match customer expectations of hole
placement.
Bug Fixes:
Status updates no longer throw occasional database
errors. We found that bug and hung it out to dry.
Cone interior silhouette lines are shown in light
gray.
Build 2.0.1 December 18, 2006
MH Pro! EZ is now covered by US Patent 7,146,295. In
celebration, MH Pro! EZ is now Version 2.0. We also had a
party at the bar to celebrate. You can celebrate by enjoying
Version 2.0.
Placement of holes in boxes is now more accurate and more
flexible. In addition to the F modifier that places a hole
into the closest box face, the new R modifier places the hole
in the Right face, (L in the Left face) as seen when looking
down the pipe from the center of the structure. This makes it
easier to move pipes into the short wall of a rectangular box,
or to select the appropriate wall for a 45 degree pipe in a
square structure.
Goss Traps (oil traps for curb inlets) do not copy to inlet
pipes.
Bug Fixes:
When using the F placement modifier for a 45 degree pipe
in a square structure, the Plan and Elevation view each
chose a different face for placement. This was bad.
More reports now switch automatically between lbs and
kgs.
The BOM re-work in 1.1.77 accidentally dropped channels
from the BOM.
Build 1.1.79 December 6, 2006
CAD blocks can now be used for openings in the Plan View.
Bug Fixes:
Hole size once again calculates when pipe size
changes.
Build 1.1.78 December 4, 2006
Dynamically sized structures are now released.
Bug Fixes:
Poured in field bases were confused when a structure
had only a floor elevation. Now they are not
confused.
Rounding of hole dimensions can now be controlled more
exactly with HoleDimRoundOffset. This allows us to
specify that 0.75 should round down to 0 while 0.76
rounds up to 1. The old Down rounding would
round 0.99 to 0., so HoleDimRoundOffset allows us to
control rounding so that it makes sense. (This fixes
a customer issue where 0.02' (0.24") was rounded Down
to 0.00" rather than the desired 0.25".)
Build 1.1.77 November 20, 2006
Boot clamps can be shown on BOM By Structure and BOM
Summary reports.
Piece notes and structure notes are now shown on BOM
By Structure reports by default.
Bug Fixes:
The code to retrieve Contractor Library data on the
Archive screen was flawed. It copied all the data, but
failed to commit the change. It now commits the
change.
Build 1.1.76 November 15, 2006
Changed the PIC check box on the Pipe Library to Pipe
Location. The new Pipe Location control provides Center,
Bottom, and Top selections. Additionally, the placement of
the hole along the pipe centerline can be controlled by a
vertical distance.
AutoStacking has been tweaked so that candidate stacks at
Build Tolerance Low are not displayed. This eliminates
essentially duplicate stacks when the structure's build height
aligns with standard precast piece increments.
Structures can now specify Silica Fume or Con MIC Shield
admixture for precast pieces.
NPC connectors have been updated to match the current
product sheets.
Added Lane HDPE pipes.
Bug Fixes:
There are now descriptions labeling each of the Custom
graphic setting options. We should have done that a while
ago.
Build 1.1.75 October 25, 2006
A new Reduction Style, "Above Outlet Hole" can be used
to locate the slab reducer relative to the top of the outlet
hole.
Frames can now specify "Notch For" to create a notch on
the precast piece below that will hold the frame. This is
similar to "Cast In", but the Frame ships loose rather than in
the precast assembly.
There is a new Stack Use key for the Structure Design
Screen. "Zero/More limit each" allows a riser zone to deeply
stack using any particular size. This allows reference
structures to be easily created that limit the weight of each
piece.
Bug Fixes:
Screen prints in landscape mode were screwed up by
code that was trapping for other errors. Now they
position properly.
Fixed a lag-by-one situation when modifying the
pricing screen.
Build 1.1.74 October 4, 2006
Bug Fixes:
Base slabs poured in risers now draw and document more
appropriately when the riser is placed on blocks before
the pour.
Build 1.1.73 September 29, 2006
Joint seals for the top and bottom of reducing structures can
now differ.
Bug Fixes:
Elevation view is more tolerant of roundoff errors.
Build 1.1.72 September 28, 2006
Bug Fixes:
Handle errors when trying to print with no printer
installed.
Build 1.1.71 September 22, 2006
Added 'Clamp Number' to the Connector Library to supplement
the existing Clamp Count field and updated these fields on the
database with manufacturer data for booted connectors (PSX,
IPS, and Kor-N-Seal.)
Stacked structures can now be copied and pasted. Use the
popup menu on the Flow Tree to copy and paste. (And you can
paste structures into different jobs too!)
Boot clamps can be included in shipping BOM lists.
The Rollout view can display the Minimum Concrete Around
Hole.
Precast pieces can designate fixed step locations.
Bug Fixes:
MCAH checks with structure joints now work.
Dog house openings can now cause a riser to pour
inverted.
Better formatting of XML reports in OpenOffice.
Build 1.1.70 September 12, 2006
Boot Band fit is now validated. MH Pro will now warn when
a boot will not fit in a structure because the curvature of
the hole is to great to support the band. The calculations are
valid for normal and parallel holes using any boot including
wide band boots.
The BOM by Structure and BOM summary reports can now show
notes about structures and pieces.
The wrap of foamed openings can now be included in shop
reports. In a related note, Foam is now on the list of
HoleTypes.
Reports can now be sorted by DeliveryDate.
Bug Fixes:
Parallel holes in the chimney of reducing structures now
document their offset properly.
Build 1.1.69 August 31, 2006
Slab Thickness now automatically varies with Height on the
Stack Editor when the piece is marked to do so.
Adjusting Rings now present only one of the possible
adjusting ring combinations of those available (e.g. an 8"
stack of rings will only show 6"+2" and will not show
4"+4").
Bug Fixes:
BOM entries for Coatings now report quantities in feet
or or meters. They used to report in inches or
millimeters.
Build 1.1.68 August 29, 2006
Added a new "Based On Sheet" field to the Other tab in the
Notes screen. This field provides a method for documenting
the sheet number in the engineering plans that includes the
structure take-off data.
Build 1.1.67 August 28, 2006
Bug Fixes:
Fixed reports for a customer.
Build 1.1.66 August 24, 2006
New graphic display options will set the Plan and Elevation
displays to look like the Shop and Submittal reports.
There is a new option on the graphic popup menu to measure
distance.
A new status message displays opening/joint collisions and
MCAH (Minimum Concrete Around Hole) violations. Note that
MCAH violations between openings are not checked for.
Build 1.1.65 August 14, 2006
Rollout View is ready for comments and criticism.
Slab reducers can now automatically calculate their volumes
and weights.
Bug Fixes:
MH Pro now exits when it says it will exit.
Build 1.1.64 August 8, 2006
The plan view now draws integral drop risers with the drop
pipe and encasement.
Individual precast pieces may be marked "By Others" on the
Stack Editor screen.
Bug Fixes:
Parts with a zero weight in the database now display a
zero weight on reports. No adjustments for joints or
holes are added or subtracted.
Build 1.1.63 July 25, 2006
Report layout changes for a customer.
Build 1.1.62 July 18, 2006
Bug Fixes:
Fixed a Frame library migration issue when setting the
value of the new "ByOthers" field.
The End library now re-generates the End name when the
outlet length changes.
FBE Remote Support now directly connects without
requiring a double click.
Build 1.1.61 July 12, 2006
Pipe, fabricated steel, and precast pieces can be marked
"By Others". Reports can use this field to select only the
parts that will be shipped.
New graphic options for Frames allows the frame to draw the
frame and cover/grate without using a grate specification.
This should mean that matched frame/cover sets will never need
a grate specification.
Build 1.1.60 July 11, 2006
PDF files can now be created for each element in the
report's Table of Contents. (That is one file per structure,
or one file per custom piece, etc.)
A Cast-In frame now makes a piece custom, and the frame name
is appended to the description of the piece.
If an AutoCAD block is available for a Cast-In frame it is
drawn with its piece in the elevation view.
Bug Fixes:
Descriptive hole callouts now note the hole shape and
uniformly describe hole size as Span X Rise.
Fixed problems with FloorElevation when a pipe was
specified for a FloorElevation. - Note this may change the
build height for existing structures as the old
calculations were bad.
Build 1.1.59 July 6, 2006
Added capability to the Plan View to display AutoCAD blocks
for Top and Bottom views.
Added a new "Flange Ext. Radius" field to the Structure
Design screen to provide control of a base's extension. Note
that existing base pieces will ignore this parameter until
they are updated in the database.
Slab Thickness on the Piece Editor screen now controls a
base's slab thickness.
Added new "Generate Hole Name" and "Generate End Name" check
boxes to the Pipe screen (see Pipe Library and End Library
tabs.) Both fields control whether the system should
automatically generate a name. In the past this was
definitely frustrating if you supplied the name first all to
realize that it gets wiped out when you start filling in the
fields. Now you can change that behavior by unchecking the
Generate Hole Name or Generate End Name box. When the box is
unchecked the system will not generate a name and you are free
to supply the name at any time while you're working on the
pipe or end library entry. Both fields default to a checked
state for a new library entry.
Build 1.1.58 June 23, 2006
Bug Fixes:
When the structure screen detects an invalid entry while
saving, it no longer resets to the last saved data (thus
throwing away all of your data entries for this structure,
that you read off of three different pages of the job
drawings, that you already highlighted and now have to
re-find, causing you to get angry and throw things at your
co-workers, causing you to lose your job, leaving you
destitute, so you steal food to survive, until they catch
you, lock you up, and you die a slow death, poor, bitter,
and imprisoned. (but that won't happen any more, 'cause
it's fixed!))
Fixed a bug in the elevation routines that draw round
holes on the back of box structures.
Build 1.1.57 June 20, 2006
Openings in boxes can now be trapezoids with guard
rods.
Weights of holes are now deducted from pieces. Holes that
are "Rough" do not deduct from the piece weight.
Build 1.1.56 June 5, 2006
Added Reinforcing Spec to allow selection of simple
reinforcing plans.
Oversized holes (larger than the inside core of the
structure) are now drawn better in box structures.
Openings can now be drawn using AutoCAD blocks. Bring us
your complex, your bizarre, your unusual openings yearning to
breathe free. Send these, the homeless, tempest-tossed, to
me.
Structure ends can also be drawn using AutoCAD blocks.
Reports and graphics can now be customized to show Metric
units even when the internal calculations are in English. Of
course, it also works vice versa.
OPSD landing platforms are now drawn in the plan view and
steps are now drawn on both sides in plan and elevation
views.
Build 1.1.55 May 31, 2006
Added structure inside dimension(s) to Plan View.
BOM Reports
Added company logo.
Added Channels.
Build 1.1.54 May 16, 2006
Modified most parts to support anchor holes.
New report for a customer.
Build 1.1.53 May 9, 2006
Delivery Date can now be overridden at the structure level.
This is a new input on the Notes screen.
Structure stacking date is now tracked.
Openings in box structures can now be drawn using custom
AutoCAD graphics.
Build 1.1.52 May 5, 2006
Replaced 'Allow Frame Collision' in the Structure Design
Screen with 'Stack Too Tall Behavior'. Stack Too Tall
Behavior provides more control for how additional height is
allocated in the stack when the stack height is changed from
the Stack Editor Screen.
Bug Fixes:
Fixed a bug in drag and drop in the Flow Tree
Screen.
Fixed a bug in Channel Bench Slope on the Structure
Design Screen.
Build 1.1.51 May 1, 2006
Frames and grates now use view dependent block names.
Frames and grates can now draw differently in each view.
Enhanced Fabricated Steel screen to allow user specified
opening sizes. Added Opening Size filtering and other
features.
Enhanced Pipe screen to allow filtering on pipe material,
and other features.
Bug Fixes:
The definition of concentricity now checks both center
offsets not just one.
Fixed Connector Type in Pipe Library when using a
Connector Library entry.
Build 1.1.50 April 17, 2006
Report changes for a customer.
Step offset is now dimensioned in box pieces below the
reducer.
Bug Fixes:
Fixed an integer overflow error that occurred with full
window graphics on wide dual screen monitors.
Fixed graphics for precast sloped bottom channels.
Build 1.1.49 April 6, 2006
Full Size Count added as a goodness criteria on the Auto
Stacking screen. This prefers structures with fewer pieces
before reducing to a smaller diameter chimney.
Parallel holes in round structures now have an offset
dimension in the plan view.
Bug Fixes:
Fixed an annoying bug in drawing channels.
Fixed an annoying bug when dimensioning zero diameter
holes in boxes.
Channel/Bench specifications no longer appear on shop
reports for pieces without channels. (Now they only appear
on bases and pieces with bases poured in.)
Build 1.1.48 March 30, 2006
Fixed frame/ring and grate/cover quantities so that they
double when the structure includes a twin inlet piece.
Customer specific changes.
Build 1.1.47 March 28, 2006
Channels may now specify a height in inches above full
height.
Added AnchorHoles as a new top treatment.
Added a new outside drop style to encase the drop for all
pieces below the tee.
Columns on the Job screen are now user specifiable and
controllable.
Structures can now specify a quantity multiplier (on the
Notes screen) for BOM and quotation reports.
Notes can now be specified at the Job and/or Structure level
so that they appear only on the Shop or Submittal
reports.
Bug Fixes:
Tall Base and Short Base goodness keys now look at the
riser above a slab base for their values.
Collision count no longer counts holes on slab bases as
collisions.
Channels now draw properly when inverted.
Build 1.1.46 March 16, 2006
Steps in box structures can now offset along the wall.
Build 1.1.45 March 14, 2006
Slabs can now have slab thickness vary with part
height.
Bug Fixes:
The Structure Screen no longer asks for data from zombie
openings.
QuotationTerms can now be a zero length string to leave
the field completely blank on the report.
Slab Thicknesses in reducers are now cleanly separated
from Slab Thicknesses in bases.
Butterfly view now allows selection of specific
pieces.
Build 1.1.44 March 9, 2006
Bug Fixes:
Resolved versioning issues with ocxs and dlls.
Descriptive hole callout now specify rise and span when
the span has been increased by one inch or more due to
pipe skew.
Customer specific display issues resolved.
Build 1.1.43 March 6, 2006
Butterfly view is released for online viewing.
Channels now blend to the outlet, providing a more realistic
channel layout.
Bug Fixes:
AutoStacking goodness sorting now ignores roundoff when
sorting for heights. This means that goodness sorting
works better.
Drop pipes now draw properly when using a base in
riser.
Frames and grates now properly rotate for all elevation
views.
Steps are no longer drawn in adjusting rings.
Step angle callout on the plan view is restored for a
specific customer. Also moved the view indicator out of
the center of the structure for this customer.
Drop openings should now properly re-associate when
migrating old jobs.
Build 1.1.42 February 20, 2006
Customer build.
Build 1.1.41 February 16, 2006
Butterfly view is available for testing.
Precast pieces with custom graphics may now have different
blocks for each view. Please contact us to setup the block
views.
Bases poured in risers are now properly handled when the
riser is blocked up to pour an extension flange.
Added fields to the Stack Editor screen to provide control
for placement of the top opening in a box. See Center Offset1
and Center Offset2 fields.
Bug Fixes:
Archive properly counts structures without generating an
error when migrating a large number of jobs.
PDF file output now prompts for confirmation before over
writing files.
Build 1.1.39 February 16, 2006
Hole Size is no longer blank on reports.
Added Structures field to Job and Archive screens to count
the number of structures in a job.
Build 1.1.38 January 23, 2006
Added logic to various controls in the Structure Screen to
highlight (light yellow) empty fields that may require data
depending on the structure application (structure or
end).
Build 1.1.37 January 13, 2006
Customer build.
Build 1.1.36 January 10, 2006
Customer build.
Build 1.1.35 December 9, 2005
Bases poured in risers can now use Match Base Key to request
flat or keyed stock.
Springline goodness is now available in AutoStacking and as
a ReductionStyle reference.
Bug Fixes:
Channels for two openings now show a large sweep that is
more consistent with actual production.
Build 1.1.34 November 21, 2005
Customer build.
Build 1.1.33 November 14, 2005
Run as a Limited account in Windows.
Bug Fixes:
Slabs can now have a slab thickness and slab position
for locating a reducing slab by the ceiling height.
Allow MH Pro! EZ to continue to run even if MHProRunOnce
is not found.
Fixed bug in Link Data screen that results from
resurrecting a pipe or end.
Build 1.1.32 November 10, 2005
The installation routines now force you to pick your plant
site before you can run MH Pro! EZ. This means that you will
not be able to forget to switch to your plant site on
installation.
Pipe Size is now dependent on Pipe Shape. This means a
change in entering pipe data, but means that arch and
elliptical pipe can be named by rise and span rather than
equivalent hydraulic diameter (this is a good thing).
Bug Fixes:
Checked structures on the Flow Tree are now really
checked.
Some report Bill of Materials were limited to 8
elements. This limitation has been removed.
Cast-in frames and covers are now drawn with the last
precast piece, rather than floating above.
Build 1.1.31 September 20, 2005
Bug Fixes:
Fixed a bug in the Opening Schedule on the Plan View
screen when the structure has no openings.
Fixed BOM generation so that Trash Guards on Ends have
the correct sense.
Build 1.1.30 September 13, 2005
Bug Fixes:
Added SlopeTop height to the dimension stack of the
elevation view.
Build 1.1.29 September 8, 2005
Safety Platforms are first class objects. The new Platform
Screen controls their elevations for structures that need
safety platforms. This is the first cut at platforms, so we
expect some comments and suggestions.
The A-A view indicator is now moved out of the center of the
structure by default.
Bug Fixes:
Structure Angle copied with a reference structure no
longer shows a counter clock wise angle then flips to a
clockwise angle on Apply.
Removed the nasty X from over sized openings in the
elevation view.
Excel XML files now work with all valid pathnames.
Build 1.1.28 August 25, 2005
Bug Fixes:
Bug fix release for two "Invalid use of Null"
errors.
Build 1.1.27 August 17, 2005
Openings can now be positioned relative to TopOfCasting,
BottomOfFrame, BelowVariance, and MatchObvert.
Ad Hoc openings in reference structures are now copied when
reference structure data is copied.
Added FBE Remote support (based on UltraVNC SC) so that
users can share their display with FBE for support.
Bug Fixes:
Fixed data synchronization errors when dragging and
dropping structures to new drainage strings.
Allow both MHProRunOnce versions 1.0.0 and 2.0.0. to be
considered valid.
Build 1.1.26 August 3, 2005
Channel weight for box structures with channels is now
approximated.
Channel weight for sloped bottom is now calculated.
Bug Fixes:
Added Allow Frame Collision field to the Structure
Design screen. When checked a structure that is too tall
will collide with the frame drawn at the specified Top Of
Casting. When not checked, (the default) a structure that
is too tall will add to the sump or secondary pour so that
the Top Of Casting will not be violated. This item was
implemented as an expedited fix in 1.1.21.
Build 1.1.25 July 18, 2005
Report changes for specific customer.
Added floor thickness to base part descriptions as needed
for Structure Design screen and Piece Editor screen.
Bug Fixes:
Fixed error in Pricing screen when deleting pricing
records.
Build 1.1.24 July 15, 2005
Big bug fix: Opening Schedules on reports since version
1.1.22 have been out of sync with the application. They are
now always in sync.
MH Pro! EZ now just exits when asked to exit. It looks for
stranded data to save, unlocks all open jobs, then just goes
away. Now if it only started up so quickly ...
New graphics fields allow slab reducers to differentiate
between a 2x3 top opening from a 3x2 top opening. Also between
slope tops at 0, 90, 180, and 270 degrees. Now to make the
elevation view graphics keep up with slope top rotations.
Version numbers now appear in the download installation
executables.
Bug Fixes:
Reports no longer pop an error when no printers are
installed on the computer.
Build 1.1.23 June 30, 2005
Bug Fixes:
Drop openings now set the pipe to the top of drop pipe
rather than following the outlet pipe when no change is
made to the dropped pipe.
Creating a structure while a job is unloading is now
silently ignored.
Killed a graphic zooming error.
Reduction Style 'From Stock Floor' was screwed up, is
now unscrewed.
Build 1.1.22 June 27, 2005
An error status is now provided when a channeled opening is
not in the piece with channels.
Big bug fix. Reports now set their paper size and
orientation rather than just hoping that Letter and Portrait
are the current settings of the system default printer. Wish
we fixed this one a long time ago. Argh.
Status information is now stored in the database. This makes
loading jobs marginally faster, after the job is synchronized
with the current version of MH Pro! EZ.
Bug Fixes:
Elevation view now shows a single dimension for all
adjusting rings and variance to the bottom of the
casting.
Some special tops are now anchored to the TopOfCasting
and place any variance below them.
The "Pipe grade is negative. #@%&" status message is
now silent if the other end of the pipe has no input for
invert elevation.
Pipes, Ends, Frames, and Grates now report the Names of
all duplicates when duplicate names are present.
Build 1.1.21 June 20, 2005
Internal build for testing.
Build 1.1.20 June 17, 2005
Changed ArchiveSchema database so that Archive does not
change the Precast Section table.
Build 1.1.19 June 10, 2005
Bug Fixes:
Fixed the display of slab tops by adding a new Side
Style.
Build 1.1.18 June 8, 2005
Bug Fixes:
PouredInField openings are not all at an elevation of
zero. Put the MiddleElevation where it belongs. Fixes
display of openings in Poured In Field Bases.
Frames, Grates, and Adjusting space all display properly
for boxes when shown short side or long side.
Build 1.1.17 June 3, 2005
Trial project for a new customer.
Bug Fixes:
Pipe resurrect function is now properly setting
Connector Model. It had been working like a resurrect
spell on Buffy the Vampire Slayer - flawed.
Build 1.1.16 June 2, 2005
The outlet invert is now included in the elevation view
dimensions on the left side of the structure.
Bug Fixes:
Fixed column width bug in the opening schedule of the
Plan View.
Build 1.1.15 May 31, 2005
Added a Preferred goodness key to the Auto Stacking screen.
Now arbitrary parts can be preferred over other arbitrary
parts. Specifically, a 24"HI base can be preferred over a
16"HI or 32"HI base. (This has been implemented only for one
company, but we know that all of you are arbitrary, so if you
want to prefer some parts in an arbitrary way, drop us a
note.)
Elevation View dimensions now go up to the
TopOfCasting.
Bug Fixes:
Inside Drop and Open To Channel drops now show a blank
entry for Connector in the on line opening schedule.
Drag and drop of structures on the flow tree now
requires confirmation so that a drop does not accidentally
change the drainage structure.
Job specific pricing data is now migrated properly when
a job is migrated.
Added ReductionStyle AboveStockFloor.
Check marks on the Flow Tree are now saved and restored
when the job is loaded.
Dog House openings can now be either Pipe In Center or
Pipe In Bottom.
Build 1.1.14 May 25, 2005
There are new drop graphics options available for reports
and on line. These options are described in a separate
email.
Add Coating Inside and Coating Outside options to the
Structure Design screen. We realize that the values here need
to be customized for each precaster, so send comments. Also
describe how/where coating and cladding need to be displayed
on your reports.
Added Step Name option to the Structure Design screen. Now
MH Pro can distinguish between various types of steps. As with
coatings above, send comments and reporting examples.
Added Joint Seal option to the Structure Design screen. blah
blah blah ... different Joint Seals ... blah blah blah
... send comments and reporting examples.
New Channel Height option: Sloped Bottom.
New Drop opening option: Open To Channel.
Mortared holes with Pipe In Center are now described as
Mortar instead of Mortar PIC. Pipe In Bottom is still Mortar
PIB and/or Mortar Pipe In Bottom as space permits.
Connector Models now sort according to how well the pipe
fits in the connector. This means that the top A-Lok connector
will now be the most appropriate connector for the specified
pipe.
Opening Schedules now handles Inside and Outside Arc
Distances based on company preference. Also, the Opening
Schedules on screen and reports are consistent with the
elevation view hole dimensions.
The elevation view graphics now allow more flexibility for
choosing the dimension reference location for holes and
precast pieces.
Bug Fixes:
A warning box is now displayed if MH Pro! EZ's database
is read-only (as on a CD).
Weight of the contractor's field pour is no longer added
to base shells.
BOM lines and Quote lines are now aware of the
StructureOption (Structure/End/Ignore) and appropriately
flit into and out of existence.
Fixed some reports so that they are more aware of
StructureOption and appropriately display pipe entries
even when the structure is Ignored.
Tweaks to Table of Contents on reports.
All reports now use the combined Notes format where
JobNotes, StructureNotes, and PieceNotes are stacked
vertically in the notes field of the report.
Elevation view no longer draws a funny chevron below the
frame/ring when the frame/ring has no precast opening
size.
Fixed run away hole problem in boxes with parallel
holes.
Bottom of Inside Drop and bottom of Open To Channel drop
do not generated BOM lines and Quote lines for Connector
and Hole.
Archive now runs a set of data integrity checks before
copying jobs. This fixes problems that occurred when jobs
were manually removed from the database.
Build 1.1.13 May 16, 2005
Internal build for testing.
Build 1.1.12 May 6, 2005
It is now possible to specify both a BuildToleranceLow and a
BuildToleranceHigh. This allows precision height structures
that always exactly match the OutletInvert to TopOfCasting
by placing any extra height below the invert as additional
sump or additional secondary pour.
Some reports now have the option of creating a Table Of
Contents.
Reducing structures can now specify the minimum height
required before reduction.
Pieces above reducers can now try to match the key on top
of the reducer.
Library data can now be resurrected using the Link Data
screen. That is, library entries can be created from the data
in a structure's frame, grate, pipe, or end even if the
original library entry has been changed or deleted.
Adding a note to a piece on the Piece Edit screen
automatically causes the piece to be included in the Shop
report, even if there is no other reason for the piece to be
considered custom.
Bug Fixes:
Killed some elevation view dimensions with 0
length.
Damn round off monster only looked dead. Now it has been
stabbed, shot, and hung.
Stranded data save requests now work better.
Build 1.1.11 April 16, 2005
Internal build for testing.
Build 1.1.10 April 15, 2005
Pipe distances on all reports are now formatted to two
decimal places.
Removed the unit notation on all elevation view linear
dimensions.
Bug Fixes:
The stranded data pop ups are now better behaved.
Build Height for structures with specified floor now
displays more correct information, less incorrect
information.
HeightStep is a floating point number. It is no longer
compared for equality. (Kills a round off monster.)
Build 1.1.9 April 7, 2005
Ad Hoc openings can be Through Floor to provide weep
drains.
Ad Hoc openings can have pipe distances and names for the
other end of the pipe.
Ad Hoc pipes display on the site plan.
Many datagrids now support scrolling using the mouse
wheel.
Bug Fixes:
Channels now draw more reliably. Channel arcs now reduce
radius to fit in most tight configurations.
Build 1.1.8 April 4, 2005
Build for a new customer.
Build 1.1.7 April 4, 2005
Bug Fixes:
Archive does not over write priced entries when copying
library data.
Build 1.1.6 April 4, 2005
Pricing migration no longer writes over existing Priced
entries. Unpriced entries are overwritten. To get Priced
entries to migrate, simply remove the conflicting Priced
entries from the current database.
Bug Fixes:
When Frame data is migrated, the SectionSize is now
copied. This bug was introduced in 1.1.1, so copy frame
libraries from older versions to have data in
SectionSize.
Quotelines and BOMlines for pipe and ends now require a
non-blank PipeMaterial. No more spurious blank
entries.
The Hole Name in the EndLibrary now works as it is
supposed to in seeding the pipe information.
Build 1.1.5 April 1, 2005
Added Prefer Cone, Prefer Slab Top, and Tall Base goodness
criteria.
Bug Fixes:
Pipe and End BOM do a better job of
generating/suppressing.
Hole name drop down is more robust on the end
library.
Build 1.1.4 March 30, 2005
Added check boxes to allow you to choose whether Structure
Angle and Step Placement will be copied with the reference
structure data.
The Status window has new tabs for BOM and Quote so that you
do not need to run a report to see them.
Bug Fixes:
The Structure Design screen now saves your selections of
precast to use even if you only move parts from available
to selected.
Removed unneeded dimensions in the on-line elevation
view that showed a value of 0 when using slab bases,
poured in field bases, and base in riser.
Removed price as a goodness criteria. Pricing is more
complex now than it was when price was added as a goodness
criteria.
There should be no tied pipe between structures unless
the entire run between the structures are tied.
Build 1.1.3 March 23, 2005
Bug Fixes:
Cleared an intermittent database access error.
Build 1.1.2 March 22, 2005
When creating a new job, the first structure is now
automatically created.
Bug Fixes:
Fixed problem with Recommended Hole Size unlocking when
it shouldn't for 1 record in the DataGrid.
Build 1.1.1 March 18, 2005
Ends and Pipes now interact better. End data can be
specified by selecting an associated pipe on the End tab of
the Pipe screen. And Pipe data will be set for the other end
of a new downstream end so that it is easy to enter runs of
ends and pipes.
BOM and Quote entries now pay attention to
StructureOption='Ignore'.
Zoom in the graphics views is now one click instead of
two.
Bug Fixes:
Pipe screen now notices uncommitted Use? entries and
properly screams at you to commit them when
appropriate.
The terms Special Height and Custom Height have been
replaced with Special and Custom respectively. This is
terse, but short.
Fixed page numbers on reports. I hope.
Build 1.1.0 March 17, 2005
Internal build for testing.
Build 1.0.25 March 7, 2005
Companies with multiple plant sites can now select the site
address and logo to use in reports from the Company tab on
the Job screen.
Added Based On Document and Based On Date to Job Data screen
and to submittal and quotation reports.
Bug Fixes:
HoleSize is now locked on the Pipe screen when using
standard connectors.
Metric pipe BOM entries no longer print gogligook for
the pipe length.
Fixed graphics for box piece on top of round bases (had
been off by 90 degrees).
Channels now count up the number of normal and bottom of
drop openings to determine the Way count. This makes more
sense.
The default BOM entry for a step is no longer "Step
Step".
A-Lok connectors now default to "Cast-In" as the hole
type.
Removed system supplied Connectors from Connector
Library.
Build 1.0.24 February 24, 2005
Report changes for a specific customer.
Reports are being changed over to the new graphics engine.
All reports that used the old engine now have two versions
- the new version for review and the old version for
compatibility.
A rudimentary Plant and Logo option has been added to allow
user to select the Logo and address data for the current site.
The interface is bad and will change in the future, but enjoy
it!
Build 1.0.23 February 20, 2005
Outside drops now show a box around the drop pipe in the
plan view.
Added channel display on elevation view.
Bug Fixes:
Frames and Grates from reference jobs to not get reset
when making other changes to structures.
Better error handling in the elevation view for holes
that are too large for the structure.
Ignored openings do not require channel ways.
Customer specific changes to reports.
Build 1.0.22 February 17, 2005
Bug Fixes:
Fixed report graphics for a customer.
Fixed Recordset error on Shop drawing for a
customer.
Build 1.0.21 February 14, 2005
Build used at MPCX 2005 for demonstrations.
Build 1.0.20 February 4, 2005
Use selections for libraries are now migrated with
jobs.
MH Pro! can now handle two different diameters of adjusting
rings on a structure.
Removed the never-fully-developed, hardly-used Middle
aggregate section of the Structure Design screen.
The Structure Design screen now loads and refreshes
faster.
Elevation view graphics now use the same graphic engine
as the plan and site plan views. This should speed elevation
view graphic updates.
Bug Fixes:
Pipe screen selects appropriate High and Low units on
input text boxes.
Pipe data and pipe end data selections are now
separated. This fixes a bug that caused inlet pipes to
revert to the default outlet pipe selection.
Build 1.0.19 January 31, 2005
Internal build for testing.
Build 1.0.18 January 14, 2005
Bug Fixes:
Fixed miscellaneous bugs in library data migration.
Build 1.0.17 January 5, 2005
Added a Use? column to the Reference Job list so that
reference jobs can be turned off for the Structure screen
pulldown.
Changed part naming for a company.
Bug Fixes:
Better scrolling on pipe datagrids.
Some datagrids now support the mouse wheel.
Removed duplicate entries on pipe pulldowns.
Pricing screen now shows prices as currency, right
aligned.
Build 1.0.16 January 4, 2005
Connectors can now be entered and edited in the new
Connector Library.
Pricing of variable height pieces can now be Min +
PricePerStep.
Bug Fixes:
End Library entries can now have a pipe rating for the
associated pipe.
Various bug fixes for notes on Ends
Fixed migration of Contractor library.
Added Joint Seal to the BOM by Structure report.
Build 1.0.15 December 20, 2004
Internal build for testing.
Build 1.0.14 December 7, 2004
Bug Fixes:
Fixed a data coercion error when migrating jobs.
Build 1.0.13 November 29, 2004
Bug Fixes:
New openings now initialize field elevation to "" rather
than copying the outlet elevation.
Unify fixed on the structure screen.
Build 1.0.12 November 24, 2004
New quotation report for a customer.
New pipe detail report for a customer.
Reports can now be exported in html format.
Pipe reports now handle a variety of pipe ends, head walls,
and aprons.
Bug Fixes:
Precast parts of varying heights now get better default
names.
Many reports have been reformatted to have at least half
inch margins - this prints out better from pdf files.
Migrated pricing records always overwrite current
pricing records. No need to re-enter the same data
again.
Build 1.0.11 November 18, 2004
Internal build for testing.
Build 1.0.10 October 5, 2004
New database for a customer.
Better calculation of the top and bottom treatment of risers
to match the keys/flats of the pieces above and below.
Bug Fixes:
MinimumConcreteAroundHole (MCAH) is no longer violated
when using a separate base.
Build 1.0.9 September 14, 2004
New Auto Stacking goodness criteria Base Height orders the
stacks by the height of the base section from shortest to
tallest. Now it is easy to pick the smallest base that will
work for the structure.
Quotation terms can now be specified for each job.
New Structure Design option - Match Base Key. When checked,
the riser above a slab base will try to match the top
treatment of the base to the bottom treatment of the riser.
(Flat bottom riser on flat base, keyed riser on keyed base;
the old behavior always used the default bottom treatment
on the riser.)
For one company, the part name now includes the top and
bottom treatments when they differ from the default.
All Shop and Submittal drawings now display many more
openings and stack BOM entries. The Plan view of the structure
shrinks to fit between the opening schedule and the BOM.
Step placement and structure angle are now included on
the Structure Design screen and in the reference structure
data.
Graphical reports now include the MH Pro! EZ release number
in the page footer.
Build 1.0.8 September 1, 2004
Company specific change for handling curb inlets.
Bug Fixes:
On screen elevation view now properly draws steps when
the structure has not changed.
Build 1.0.7 August 19, 2004
Added reports and customizations for new customers.
Report windows now remember where they were on screen and
always pop up in the same location with the same zoom.
Steps can be installed in reducing slabs. (Actually in
anything).
When a quotation element has no price, the name of the
element is now included in the status message. This makes it
easier to find the element in the pricing screen and price
it.
The description of channels on the submittal reports is now
customizable for each customer. You can call it channels, or
you can call it invert, or you can call it bench, but you
doesn't have to call it Johnson ...
Build height display can be customized for each customer so
that risers can be called barrels, or spacers, or Johnson
...
Status messages now include HoleName and PartDescription
where appropriate. This is more descriptive than Opening #3 on
StackElement #4.
New graphics routines will draw sloped precast tops. Sloped
tops can be drawn with or without a honeycomb grate.
Bug Fixes:
When a structure is added upstream of an existing
structure, the opening on the existing structure is now
interpreted as being at the outlet invert of the existing
structure. It used to be interpreted as FieldElevation=0
which tended to make the build height and elevation view
very strange. Note: it is good practice to set the
FieldElevation for the new opening, because the outlet
elevation is probably not where you want the new
opening.
AutoStacking now uses the same methods for initializing
the pricing table entries that the rest of the system
uses.
Graphics for poured in field bases are improved. The
system now does a better job of determining where the
pipes are in relation to a poured in field base.
Build 1.0.6 August 6, 2004
New Contractor data table. Select contractors from a list of
known contractors. Fill out the data for a contractor by
dragging a contact from MS Outlook.
PIF bases are now drawn with a minimum thickness of 6
inches.
Improvements in the display of company logos.
Added joint seal to the BOM summary report.
Stack Edit was known as Piece Edit.
Bug Fixes:
PIF bases now correctly locate the highest top of pipe
for AutoStacking and display.
PIF bases now correctly pour below the invert.
Fixed a problem that the datagrids on pipe, frame, and
grate had when deleting the last element in some
situations.
Moving from structure to structure is now faster when
large numbers of structures are loaded.
Build 1.0.5 July 19, 2004
New PartDescription and ProductID/PartNumbering scheme. The
pricing screen now has more say in how parts are named.
The license agreement is much more readable and
accurate.
BOM Summary now sorts alphabetically.
Bug Fixes:
Structure screen now properly saves the Ignore Opening
setting on new openings.
Report elevation view now does a better job of adding
horizontal lines.
The opening schedule now properly reports hole locations
relative to the inside floor before any secondary
pours.
Invert elevations on the opening schedule are not
rounded up or down.
Piece editor handles arrow keys better.
Piece editor no longer compares floating point numbers
for equality.
Build 1.0.4 July 8, 2004
Added Employee Name to the Job Data screen. Employee Name
is now printed on the Quotation report in place of the
previous static name.
On screen Plan View now shows pipe stubs and drop
geometry.
On screen Plan View can be rotated like the site plan.
Bug fixes for Build Height calculations, Link Data,
Elevation View graphics, null more migrated nulls.
Removed inadvertent rounding to invert elevation in
opening schedule.
Build 1.0.3 July 1, 2004
Major changes to build height to correspond with reports
that display only the information needed by the contractor and
engineer. The precaster's constraints are still available on
screen.
Frame and Grate now allow for some simple parametric
graphics.
The adjustment section now has filler graphics to get the
stack up to the bottom of the frame.
Fixed a bug in FBEUcAttr that caused an overflow when
MH Pro! EZ was in use for a long time.
When migrating pipes, PIC is assumed if no good information
is available.
Expanded default precast descriptions to include more
customer specific criteria.
Build 1.0.2 May 31, 2004
Build height calculations now handle Leave Short
properly.
Multiple structures per page demo report now displays the
full company logo.
Build 1.0.1 May 28, 2004
Minor fixes to Piece Editor, BOM Summary, and Flow
Tree.
Build 1.0.0 May 27, 2004
Added 'Taller Lower' to the AutoStacking Goodness criteria.
'Taller Lower' prefers taller risers below shorter ones.
Volume and weight of precast channels are now included with
the base shell weight where weight is reported. (Round bases
only) (Not present on the AutoStacking screen).
Added Most downstream outlet orientation selector to the
Site Plan screen.
Site Plan and Plan View now use the mouse wheel to zoom
in and out.
BOM and Quotation part descriptions are now directly pulled
from the Pricing screen description field.
Structures with Top of Casting and a Floor Elevation now
report a reasonable build height even when there are no
openings.
This version automatically loads and registers the
supporting FBE and MHPro .dlls and .ocxs. This means that it
can be run side by side with the next version of MH Pro! EZ
without uninstalling and re-installing each version.
Added a Piece Editor screen to allow pieces to be manually
specified and edited. This screen can be used to add notes
for each piece. The piece notes are output only on the
shop reports.
Frame/Ring and Grate/Cover data is now reorganized on some
customer reports.
Frame/Rings and Grate/Covers now have a new SteelType field
to allow each piece to be labeled as a frame, or ring, or
any desired name.
The Pipe screen now supports editing data directly on the
data grid and on associated controls for each field. New
fields have been added for specification of corrugated pipe,
Hole type, and Pipe-In-Center(PIC).
Extensive work on Archive to ensure library and structure
data associations are maintained in the current database.
The build height displays now include the Design Height.
(Design Height is TOC-IE+sump.) Added a vertical line to help
separate the two columns of the build height
calculations.
The elevation view and BOM now label the precast sections
from the top of the stack down.
A Product ID can now be entered for the Additional Quote
line item.
Replaced Unlinked Data Screen with Link Data. In addition to
providing a method for changing unlinked data, the new screen
includes a "Filter By" section for filter the type of data to
be included for changing. Data types include, All, Unlinked,
Linked (Used in Job) and Linked (Not Used in Job). The Linked
data types provide a quick method for setting Frame/Ring,
Grate/Cover, and Pipe data regardless of whether the data is
up to date or not.
Build 0.9.7 April 12, 2004
Re-fix the intermittent graphics bug when openings are
tangent to box features.
Added new curb inlets.
Build 0.9.6 April 7, 2004
Fix an intermittent graphics bug when openings are
tangent to box features.
Build 0.9.5 April 5, 2004
Added graphics support for AutoCAD block files stored as
lines and arcs.
Build 0.9.4 April 2, 2004
Added graphics support for some precast curb inlets.
Stripped all macros and VB code out of the databases.
Build 0.9.3 March 30, 2004
Better handling of Metric databases and Metric reports.
Build 0.9.2 March 25, 2004
Bug fix release for 0.9.0 and 0.9.1
Migration now handles job names with "'" characters.
Build 0.9.1 March 22, 2004
Added a Delete button to the Pricing screen to allow
obsolete entries to be deleted.
Build 0.9.0 March 18, 2004
Migrated structures now sync with the current version
when viewed.
Migrated Pipe, Frame, and Grate data now creates entries in
Pricing at migration time.
Parts can have a variety of top treatments.
Top treatment can include both a cast-in frame and
threaded inserts.
BOM now reports user specified pipes.
The description and ProductID for all pipes, connectors,
holes, frames, rings, covers, and grates are now set on the
Pricing screen.
Frame/Ring and Grate/Cover can be: set on the Reference
Structure using the Structure screen and copied from the
Reference Structure to the Structure when the Reference
Structure changes on the Structure Screen. Frame/Ring and
Grate/Cover selections are now displayed on the Structure
Design screen.
Added Unlinked Data screen.
Build 0.8.46 February 4, 2004
Fixes to the quotation module
Build 0.8.45 January 23, 2004
Plan view is now dynamic
Bug fixes for Fabricated Steel screen
Build 0.8.44 January 14, 2004
Fixed a problem on the pricing screen, the Priced field was
not being saved.
Fabricated Steel screen now saves the column widths on
reset.
Build 0.8.43 January 13, 2004
Collision calculations now reference the spigot length for
the parts involved. Fixed other collision calculation
issues.
Build 0.8.42 January 12, 2004
Moved 'Use?' column on Pipe screen to Column 1.
Removed ID on Pipe screen.
Bug Fixes:
Priced field on Pricing screen now works.
Collision calculations now use the spigot height of the
joint.
Build 0.8.41 January 4, 2004
Bug Fixes:
Tolerate new grate/covers with no clear opening
size.
Build 0.8.40 December 31, 2003
No duplicate stacks when AutoStacking.
Fabricated steel data is now on all reports.
New demonstration reports.
Bug Fixes: report initialization, missing graphics on
reports
Build 0.8.39 December 18, 2003
Release of the new Fabricated Steel and Cast Iron
screen.
Reports have been updated for the new Fabricated Steel
and Cast Iron data.
Many data fields now differentiate between blank and the
default value of the field. Blank values are not coerced
to the default.
Build height variance is now displayed in red when out of
spec.
Eliminated the Simple Build sub title.
Rows in the Billing/Pricing table are now generated if
missing.
Pipe screen pull downs are repositioned.
Report generation now forces the user to acknowledge
statuses.
Build 0.8.38 December 15, 2003 to
December 16, 2003
Internal build for testing.
Build 0.8.37 December 3, 2003
Archive is now internal to MH Pro! EZ.
Archive no longer runs automatically on installation - it
must be run for each MH Pro! EZ user.
Versioning of databases now occurs at MH Pro! EZ start up,
not on Installation.
Other changes to Attributes, Geometry, and Reports.
Build 0.8.36 October 31, 2003 To
December 2, 2003
Internal build for testing.
Build 0.8.35 October 30, 2003
Changed the Pipe Screen to implement a job independent
Pipe Library so that pipes can be shared across jobs.
Implemented partial Quote for a customer.
Added HoleSize to a customer's opening schedule.
Added Press-Seal connectors (PSX and PSX:DirectDrive).
PSX:Series 6 connectors were not added.
Added OpenDrop option on Structure Screen.
Height is now a Goodness criteria on the AutoStacking
Screen.
Miscellaneous bug fixes.
Build 0.8.34 October 22, 2003 To
October 30, 2003
Internal build for testing.
Build 0.8.33 October 3, 2003
Database changes for a customer.
Build 0.8.32 October 1, 2003
Internal build for testing.
Build 0.8.31 September 30, 2003
Added BaseInRiser reference structures for storm and
sanitary use.
Build 0.8.30 September 30, 2003
Internal build for testing.
Build 0.8.29 September 25, 2003
Added 60" reference structures for a customer.
Poured in field bases now pour over the highest non-drop
opening.
Elevation view updates with stack selection.
Added Agency field for jobs some reports use this
field.
Added wall thicknesses to vitrified clay pipes.
Added Invert Elevation to opening schedule for a customer
and removed invert in Elevation view call out.
Calculate number of ways in channel and display on some
reports.
Build 0.8.28 September 23, 2003
Internal build for testing.
Build 0.8.27 September 15, 2003
Added Base-In-Riser for 48" structures.
Added Hancor and ADS pipes.
Added Kor-N-Seal Corrugated Pipe Adapters.
Bug Fixes:
Pipe and casting screen still have errors on job
deletion.
Build 0.8.24 September 11, 2003 to
0.8.26 Sept. 15, 2003
Internal builds for testing.
Build 0.8.23 September 10, 2003
Drop openings have been reworked so that drop openings can
have a fall across the manhole, different pipe type than the
top of drop, and can be labeled as Inside or Outside
drops. Graphics and reports only handle Outside drops.
Bug Fixes:
Pipe and casting screen still have errors on job
deletion.
Build 0.8.20 September 5, 2003 to
0.8.22 Sept. 9, 2003
Internal builds for testing.
Build 0.8.19 September 2, 2003
Bug Fixes:
Pipe and casting screen still have errors on job
deletion.
Build 0.8.18 August 28, 2003
Internal build for testing.
Build 0.8.17 August 27, 2003
New structures can be added from the structure screen.
New structures get Pipe, Casting, and Reference Structure
data from the downstream structure when created.
Added sort of openings by angle or name based on
precaster's preference.
Added openings schedule to plan view.
Changed openings schedules for some reports.
Fixed miscellaneous bugs in MHProArchive and MHProEZ.
Fixed Build Height calculations for Poured in field
bases
Builds 0.8.16 August 20, 2003 to
August 27, 2003
Internal builds for testing.
Build 0.8.15 August 12, 2003
Changed the default pipe names. Visual re-design of Job
Screen.
Elevation View is now Elevation (View A-A) with view
direction arrows now on the Plan View. Added checks for
stranded data when stacking and reporting.
Build 0.8.14 August 8, 2003
Internal build for testing.
Build 0.8.13 August 6, 2003
Fixed report problems with newly added structures.
Job Data screen now has additional information for report
headers.
Build 0.8.12 August 5, 2003
Internal build for testing.
Build 0.8.11 July 28, 2003
Production build for two customers. Some bug fixes, but
mostly full databases for each customer for boxes and 48"
round.
Builds 0.8.2 July 17, 2003 to 0.8.10
July 25, 2003